Im from Seattle Im currently working at a dairy equipment manufacturing company and am looking to step my welding skills up especially in the areas of TIG/MIG. Any information that allows me to further my knowledge would be extremely helpful. Specifically in the area of WFS/IPM and Voltage settings for carbon steel on 1/8 to 1/4 in." in all positions using the GMAW/MIG process. I would really appreciate specific tricks used in order to properly set your machine.
Prior to getting back into welding about 2 months ago I was mainly on prep work, however i have been welding sense 16 just rusty and would appreciate any and all advice and knowledge that will allow me to excel at this opportunity.
Thanks for the time!
