Page 1 of 1
Another new guy from Minnesnowta
Posted: Tue Feb 07, 2017 10:31 am
by 77cruiser
Int'l Falls. I was taught to weld by my dad when I was about 10 yrs. old, never have mastered it though. So for the most part I'll be just hanging around & observing. I do tend to look at Jody's You Tube vids which are excellent.
BTW I'm a retire truck driver pulpwood & gravel for 16 yrs. Then I went to see how the other half lives & made paper for 25 yrs.
Jim
Re: Another new guy from Minnesnowta
Posted: Tue Feb 07, 2017 5:03 pm
by Farmwelding
Welcome aboard. Truck driver eh? Good or bad driver? For gravel were you driving semis or straight trucks.
Re: Another new guy from Minnesnowta
Posted: Tue Feb 07, 2017 9:10 pm
by 77cruiser
Farmwelding wrote:Welcome aboard. Truck driver eh? Good or bad driver? For gravel were you driving semis or straight trucks.
Hopefully I was considered good. Drove both tandem dump & belly dump. Preferred hauling wood though, you were more out on your own.
Re: Another new guy from Minnesnowta
Posted: Tue Feb 07, 2017 10:29 pm
by MinnesotaDave
Welcome from Bemidji
Re: Another new guy from Minnesnowta
Posted: Wed Feb 08, 2017 8:31 am
by Mike
Jim, welcome to the forum.