Retired from welding and still wanting to weld. Just bought a used Lincoln Invertec 275-S and set it up for tig scratch start. It doesn't weld with switch in TIG position but does in SMAW setting. Just wondering why? Also the HOT START doesn't work in the SMAW setting. Have not used this type of welder only the old type AC/DC Millers, Lincoln's, Holbart's, etc.
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Welcome!
The last Invertec 275 machines I used were "lift-arc" in TIG mode. (They were fine machines, BTW.)
Here's a link to the manual for that machine, if you don't have it...
http://www.lincolnelectric.com/assets/s ... /im802.pdf
Steve S
The last Invertec 275 machines I used were "lift-arc" in TIG mode. (They were fine machines, BTW.)
Here's a link to the manual for that machine, if you don't have it...
http://www.lincolnelectric.com/assets/s ... /im802.pdf
Steve S