Hello everyone, long time lurker here. Finally decided to join after banging my head 1 too many times over AL tig process.
Laid my first beads some 33 yrs ago with a Linclon buzzbox at age 13 after being fascinated seeing what a little juice and skill could turn an 1/8" rod of steel into. Wound up welding pre-fab HVAC after high school for 12 yrs or so, along with a little structure, picking up a 6g and 6gr in mig along the way before settling into machine work. Currently, I'm just a weekend warrior when it comes to welding. I've had a Miller Synchro 350 for a while now and figured it's time to get some help with this aluminum. I've done the stackin' drill and have made improvements there, but something is just not translating over to where and when I need it most.
Glad to be part of the group and hope I can contribute at some point.
A big thanks to Jody for all his videos, as they've helped out considerably.
Regards,
Junior
junior
welcome aboard
if you post some photos along with your settings
and step up I'm sure some of the great aluminum
welders here can be a great help to you.
craig
welcome aboard
if you post some photos along with your settings
and step up I'm sure some of the great aluminum
welders here can be a great help to you.
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil