Hello,
This is my first Post.
I'm interested in a welding table. A 2 x 4 Certiflat table looks interesting. Any one have experience with this?
Also where would I look for a kit of clamps that would work well with this table
Thanks
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
Welcome!
My cert-flat table is one of the best thing I have bought for my shop! I haven't found anything I haven't been able to clamp down to weld. As far as clamps, make your own. Harbor Freight has what you need and it a good start. You just need to buy 1 1/2" X 3/16" flat stock and 5/8" round cold rolled and you're off to the races!
My cert-flat table is one of the best thing I have bought for my shop! I haven't found anything I haven't been able to clamp down to weld. As far as clamps, make your own. Harbor Freight has what you need and it a good start. You just need to buy 1 1/2" X 3/16" flat stock and 5/8" round cold rolled and you're off to the races!
- Attachments
-
- Clamps.jpg (108.26 KiB) Viewed 1004 times
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
- tungstendipper
-
Weldmonger
-
Posts:
-
Joined:Sun Nov 19, 2017 10:09 am
Here's my latest prototype clamp (modeled after Fireball Tool's clamp) used to reach areas where this clamp wouldn't reach.
- Attachments
-
- swivel clamp.jpg (112.15 KiB) Viewed 997 times
Lincoln MP 210, Lincoln Square Wave 200,
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Everlast 210 EXT
Thermal Dynamics 25 Plasma cutter
" Anything that carries your livelihood wants to be welded so that Thor can’t break it."
CJ737
Nice table, im building mine now, it will be a bit rough but functional.tungstendipper wrote:Welcome!
My cert-flat table is one of the best thing I have bought for my shop! I haven't found anything I haven't been able to clamp down to weld. As far as clamps, make your own. Harbor Freight has what you need and it a good start. You just need to buy 1 1/2" X 3/16" flat stock and 5/8" round cold rolled and you're off to the races!
Uni Mig 180 AC/DC tig
Oxy Acet
LPG
Older Newbie
Oxy Acet
LPG
Older Newbie