HTP Invertig 221 Dual Voltage Water Cooled

Winky2326 · Tue Mar 10, 2020 8:21 pm

I purchased welder in December 2018 to pick up welding as a hobby. Welder is still under warranty and used about 15 times. I have almost every accessory to include:

Htp invertig 221 dual voltage Tig welder with water cooler ck 20 torch, foot pedal, ground clamp, HTP covers for welder and water cooler.
Asking $2900

Blue Demon ERCuSi-A X 1/16" X 36" X IOLB Box TIG Rod $60

Blue Demon ER308L X .035 X 36" X I LB Tube stainless
steel TIG welding rod

Harris 80SD250 Welding Wire, ER80SD-2, 3/32" x 36" MS,
IOlb. Package $60

Blue Demon ER70S2 X 1/1 6" X 36" X IOLB Box premium
carbon steel TIG welding rod $60

Blue Demon ER70S2 X 3/1 6" X 36" X IOLB Box Premium
Carbon Steel Tig Welding Rod 60$

6ea - 36" Welding Electrode Rod Guard Holder Storage
Canister Holds up to IO lbs $60

Welding Tips & Tricks TIG FINGER COMBO Welding Glove
Heat Shield by Weld Monger, X-Large $10

CK FLI 525SF FlexLoc Pkg 1 50A Fx w/ 25' 1 Piece Cable with
with CK Worldwide SL2-35 Gas Cooled Safe Loc, Black
CK FL2L FlexLoc Head 2 Series
asking $190

Tig-Pen Welding Finger Feeder Rod Holder Pencil Filler
Metal
Asking 20

BBW #16 Ceramic NEW BBWSG-19 & Original BBW
Moose Knuckle #14 Ceramic (Single) 20$
Furick Cup FUPA #12 Ceramic $20
FURICK #8 Pro Cup Kit (4 Pack) - 8PR04 $20
Furick Cup LS Fab"Unbreakable" TIG Welding Cup $25
BBW #16 Welding Cup Kit with Titanium Cover Single - $30
Furic cup
Ally5 Cup Kit with #9/#20 Torch Adapter - A5920 - Furick
CuP $20
FUPA #12 Wending Cup Kit with Titanium Cover -Furick Cup $30

CK Worldwide 45V42 2GL40 Gas Lens Collet Body

#17, 18 and #26 Torch Adapter Kit - 17KIT - Furick Cup
20$

CK 2C332GS Collet, Wedge, Gas Saver, 3/32" (2.4 mm) 2
Series, 5 pack
TIG Welding Torches Stubby Gas Lens Collets Alumina
Nozzles Back Cap Kits Fit SR WP 17 18 26 Torch 16pcs $15

200 Argon tank full of Argon 225$

Southwire 8/3 Heavy-Duty STW 40-Amp/250-Volt Nema
6-50 Blue Welder Extension Cord, 25- Feet, 8-Gauge, STW
Jacket for Superior Performance, Rated at 40 Amps, 250
Volts and 10,000 Watts $60

Metal chop saw dewalt D28715
Asking $120

DEWALT Portable Band Saw, Deep Cut, 1 0 Amp, 5-Inch
[DWM120K)
Asking $180

SWAG Off Road V3.0 Portaband Table With Foot Switch
Asking $100

Magswitch Mini Multi Angle with 300 Amp $35

Magswitch 300 Amp Ground Clamp $30

TIG Welding Tungsten Electrodes 2% Lanthanated 3/32" x
7" (Blue, WL20) 10-Pack

I am willing to work out reasonable offers with a discount as a package.

Oscar · Tue Mar 10, 2020 10:04 pm

I don't think you'll get a lot of hits here for that, but if you do want to increase your chances, take the time to price everything out, and then set a package price for the whole thing. The first question you'll get is "what is the lowest price you will take for item XYZ??"

Winky2326 · Wed Mar 11, 2020 5:05 pm

Thank you for the advice. Just edited posting. I appreciate the help

Oscar · Wed Mar 11, 2020 6:35 pm

Thanks, I am interested in a few parts. Let me get a good look at them when I get home from work.

Oscar · Wed Mar 11, 2020 11:17 pm

Winky2326 wrote:Blue Demon ER70S2 X 3/1 6" X 36" X IOLB Box Premium
Carbon Steel Tig Welding Rod 60$

Did you mean to type "3/32" instead of "3/16"?

Oscar · Thu Mar 12, 2020 5:33 pm

Hello? anybody home? lol

Oscar · Fri Mar 13, 2020 10:15 am

Looking to buy filler wire. I'm an impulse buyer, please respond soon, lol

alexweeks1996 · Wed Mar 18, 2020 10:17 pm

Hey, would you be interested in selling the water cooler & the CK20 torch?

UniqueTouch · Fri Mar 20, 2020 9:10 pm

winky where are you located? I am interested

UniqueTouch · Fri Mar 20, 2020 9:14 pm

is the CK FLI 525SF FlexLoc Pkg new or used?

Oscar · Sat Mar 21, 2020 12:43 am

I think he's yankin' our chains; it doesn't look like he wants to sell, lol.

alexweeks1996 · Sat Mar 21, 2020 8:38 am

Oscar wrote:I think he's yankin' our chains; it doesn't look like he wants to sell, lol.

Haha, well although we may lose a good deal, hopefully he's considering keeping his setup to dive into the art of TIG welding. I hope that he does find a way to continue, even if I have to stack up another check for a new cooler

Winky2326 · Sat Apr 04, 2020 8:11 pm

I am sorry for the delay. I am here and everything except the chop saw is still available. I dont check often. If you all would like to call me, my number is 8139285603. I am in tampa fl.

Im sorry again for my delay.

If you all want pics, send me a text and I will send close ups of what you ask for. I cant figure out how to post pics here.

TraditionalToolworks · Sun Apr 05, 2020 2:39 am

Too bad you're so far, I'm hesitant to do a deal when you're on the opposite site of the country. How would you ship to California?

Let me think about it overnight and see how I feel tomorrow, maybe I'll call you.

I just sent you a PM here on WTAT.

Oscar · Sun Apr 05, 2020 10:42 am

He's not gonna check his PM's, lol. Send him a text or call. I text'd some questions yesterday to him, and he was quick to respond that he doesn't want to ship and wants someone local to him to go pick everything up, lol. But I supposed if you wanted to take everything off his hands he would be willing to ship, possibly.

TraditionalToolworks · Sun Apr 05, 2020 2:31 pm

Oscar wrote:He's not gonna check his PM's, lol. Send him a text or call. I text'd some questions yesterday to him, and he was quick to respond that he doesn't want to ship and wants someone local to him to go pick everything up, lol. But I supposed if you wanted to take everything off his hands he would be willing to ship, possibly.

Yeah, I texted him and he sent pics. I haven't talked to him yet. He has quite a bit of stuff, and I would probably only do a deal with PayPal to be covered. I bought a '46 Chevy Pickup in Missouri like that about a year and a half ago.

TraditionalToolworks · Sun Apr 05, 2020 5:25 pm

Oscar wrote:He's not gonna check his PM's, lol. Send him a text or call. I text'd some questions yesterday to him, and he was quick to respond that he doesn't want to ship and wants someone local to him to go pick everything up, lol. But I supposed if you wanted to take everything off his hands he would be willing to ship, possibly.

He did call me back, but it seems he has a buyer for the welder and consumables for what sounds like more than I would pay, and he doesn't have the original boxes to ship the welder in either, so I really feel he's best to sell it locally. He might have some of the mags and the helmet, but no welder is a deal breaker for me as I am primarily wanting another welder.

Oscar · Sun Apr 05, 2020 6:27 pm

TraditionalToolworks wrote:
Oscar wrote:He's not gonna check his PM's, lol. Send him a text or call. I text'd some questions yesterday to him, and he was quick to respond that he doesn't want to ship and wants someone local to him to go pick everything up, lol. But I supposed if you wanted to take everything off his hands he would be willing to ship, possibly.
He did call me back, but it seems he has a buyer for the welder and consumables for what sounds like more than I would pay, and he doesn't have the original boxes to ship the welder in either, so I really feel he's best to sell it locally. He might have some of the mags and the helmet, but no welder is a deal breaker for me as I am primarily wanting another welder.

Oh ok, then better off looking else where. I don't know if you do social media, but perhaps you can convince someone on facebook/Instragram who wants the Invertig 400 that you can take their 221 off their hands. Win-Win.

TraditionalToolworks · Sun Apr 05, 2020 6:52 pm

Oscar wrote:Oh ok, then better off looking else where. I don't know if you do social media, but perhaps you can convince someone on facebook/Instragram who wants the Invertig 400 that you can take their 221 off their hands. Win-Win.

Actually I was an early adopter of FaceBook, but have weened myself off of it and this June will be 2 years since I've posted anything to FB. It taught me a great deal about social networking with colleagues as well as family, mostly for the worse. I despise it nowadays.

I do use Instagram, even though owned by FB, and the fact that the phone software is crap, I use it in my browser aside from the postings I do. FB phone software is crap also, and I know a person that manged the project for several years. I consider their lack of ability to change orientation to be a failure in phone software akin to programming 101 on phones. I have done phone work, but mostly on Android, despite me using an iPhone.

(I work mostly on Linux)

I also have a couple YouTube accounts, one for my shop/home building I'm doing in Lake County, and the primary one I've used for my hobbies. I don't like to spend too much time editing videos, so use Instagram more and typically only post short videos.

That said, I know FB marketplace is used by a lot of people, just not me, nor any of the forums.

If you hear of anyone doing an upgrade and selling a 221, let me know. I also wouldn't be adverse to buying a Dynasty 210DX.

Winky2326 · Tue Apr 07, 2020 11:50 am

The buyer i thought i had did not work out. Everything still available except chop saw. I would prefer to sell locally and would be concerned about shipping. Please text me and i will respond as quickly as possible. I will try to be better at checking these posts. If you text, i will send better pics

TraditionalToolworks · Wed Apr 08, 2020 2:50 am

Winky2326 wrote:I would prefer to sell locally and would be concerned about shipping.

I agree Winky, had you kept the original boxes it would be less concern, but without them you should definitely sell locally.

alexweeks1996 · Tue Apr 14, 2020 10:40 am

Would you want to sell all the Furick cups & magnetic ground clamp? I would pay the shipping and make a fair offer

Winky2326 · Fri Apr 17, 2020 3:10 am

I would like to sell it all together. If that doesn't happen, I may just hold on to the welder. New hobby im getting into might be beneficial to have the welder. Not really enough to justify keeping it says the wife. We will see. Thank you for your interest.