FS: Millermatic 211 Inverter with Spoolmate 150 & extras
Posted: Sun Dec 16, 2018 1:28 pm
The time has come. Gonna part ways with my Millermatic 211 Inverter. Now have an HTP Pro Pulse 300, so gonna let this one go to someone who will hopefully make good use for it.
It is a bundled package.
It includes:
$799 firm, plus shipping to your door. Box size would be approx. 28" L, 16" W, 18" H. Shipping weight approx 55lbs. I prefer Check/MO/Cashier's check. Paypal accepted if you cover fees. My ZIP is 78045.
It is a bundled package.
It includes:
- Qty:1, Millermatic 211 Inverter Welder w/ main board replaced by Welding Machine & Torch Repair in San Antonio, Tx (was done June 2018). Drive motor assembly replaced about 8mo ago or so. All knobs and AutoSet features work as intended. Gas solenoid works as intended as well of course.
- Qty: 1, Miller 211 machine cover
- Qty: 1, replacement ground clamp (already installed, larger than stock)
- Qty:1, Miller M100 MIG gun w/stock liner
- Qty: 1, stock 8" spool adapter with plastic nut
- Qty: 1, Miller M100 0.045" liner
- Qty: 1, Miller stock 0.023"/0.030"/0.035" drive roll
- Qty: 1, Miller 0.035"/0.045" flux core drive roll
- Qty:1, HTP M25 250A, 15-foot MIG gun with stock 0.030"/0.035" Liner (must use 3-3.5 tension to compensate for slight drive roll wobble and extra gun length)
- Qty:1, HTP M35 0.030"/0.035" replacement liner
- Qty: 1, HTP M25 0.023" liner
- Qty:21, Miller 0.030" tips
- Qty:1, Miller 0.023" tip
- Qty: 5, Miller 0.035" tips
- Qty 20, HTP 0.045" tips
- Qty: 3, M100 copper nozzles
- Qty:2, HTP 3/8" M25 nozzles
- Qty:1, HTP 1/2" M25 nozzle
- Qty: 2, Miller flux core nozzle shroud
- Qty: 1, Miller 6-50P 240V Plug
- Qty: 1, Miller 120V, 15A plug
- Qty: 1, Miller 120V, 20A plug
- Qty: 1, Miller Spoolmate 150 (used only once to make sure it works)
- Qty: 2, Miller Spoolmate 150 stock nozzles
- Qty: 44, generic Spoolmate 150 0.035" tips
- Qty: 5, generic Spoolmate 150 0.030" tips
- Qty: 1, generic ER4043 aluminum spool, 2lbs (installed in Spoolmate)
- Qty: 3, HTP M25 diffuser/tip holders
- Qty:3, HTP M25 diffuser adapter
- Qty: 3, HTP M25 plastic heat insulators
$799 firm, plus shipping to your door. Box size would be approx. 28" L, 16" W, 18" H. Shipping weight approx 55lbs. I prefer Check/MO/Cashier's check. Paypal accepted if you cover fees. My ZIP is 78045.