Comments & questions on new & past videos
User avatar

My Take on mig short circuit overhead.
Anyone going to Fabtech?
uvjZNTqi_aU
Drifta-X
  • Posts:
  • Joined:
    Mon May 26, 2014 2:53 am
  • Location:
    Melbourne Australia

Can't wait to get home to watch this, sort of maxed out my mobile data
I have a soldering iron!
Drifta-X
  • Posts:
  • Joined:
    Mon May 26, 2014 2:53 am
  • Location:
    Melbourne Australia

Good info there jody, and makes me feel better bout the same welds I did, and on the aussie branded version of your welder.
I was giving myself a lot of grief with the root crowning, but since yours looks the same im now a happy camper.
And funny thing is I keep a note book of your settings with that welder as that will be the one I get once I have my tig.
I have a soldering iron!
Drifta-X
  • Posts:
  • Joined:
    Mon May 26, 2014 2:53 am
  • Location:
    Melbourne Australia

Any chance you could do some open root mig in part9
I have not yet once had to do 1 with a backing plate.
Oh on 10-12mm plate too pls.

Ps, new job started. Forman only wants push mig. Nothing else :(
I have a soldering iron!
AKmud
  • Posts:
  • Joined:
    Fri Jan 25, 2013 1:47 am
  • Location:
    Wasilla, Alaska

When will your videos on aluminum mig be coming out?? Vertical and overhead especially....
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Drifta-X wrote:Any chance you could do some open root mig in part9
I have not yet once had to do 1 with a backing plate.
Oh on 10-12mm plate too pls.

Ps, new job started. Forman only wants push mig. Nothing else :(
Here you go bud.

https://www.youtube.com/watch?v=FYsZROlFVVw

https://www.youtube.com/watch?v=uWv26K8r-U4
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Drifta-X
  • Posts:
  • Joined:
    Mon May 26, 2014 2:53 am
  • Location:
    Melbourne Australia

Cheers ak
Would be cool to see done with out weave aswell though, just stringers.
I have a soldering iron!
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Jody did a mig O/h butt weld ages ago. Search his Mig vids and you should track it down.

Mick
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

weldin mike 27 wrote:Jody did a mig O/h butt weld ages ago. Search his Mig vids and you should track it down.

Mick

I linked it above bud.... :)
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Sorry pally, I only saw the Miller ones. Top work.
Post Reply