[admin]

http://www.weldingtipsandtricks.com/sti ... ckets.html

Saw a lamp on instagram made by @superiorwelding using threaded pipe so I made one with socket weld fittings.

best,

Jody Collier

6UPBpeW9tFE

[admin]

Lincoln tig175 squarewave


Sent from my iPhone using Tapatalk

[DeepSouthWelder]

Thanks for the reply ,I did not see the machine in the video until I watched it again just now. Excellent video as always and I believe that type of bulb you used on the lamp is called an Edison bulb.

[rake]

Jody, a piece of frayed draw cord and a shopvac will make short work of snaking your wire through those joints.
And no melting wires either!

[castweldsolutions]

In one of Jody's older videos, he tig brazes cast iron to stainless, and he does it in AC in order to use a high negative balance, and increase the cleaning action.

In this video, it appears as though he welded it in DC-? Can anyone confirm what polarity he used in this vid when he was using the silicon bronze? Is AC only advised when joining cast metals?, and DC- for all others?

Just curious. Once again, great vid and it too has got me wanting to go make a lamp lol.

[admin]

In one of Jody's older videos, he tig brazes cast iron to stainless, and he does it in AC in order to use a high negative balance, and increase the cleaning action.

In this video, it appears as though he welded it in DC-? Can anyone confirm what polarity he used in this vid when he was using the silicon bronze? Is AC only advised when joining cast metals?, and DC- for all others?

Just curious. Once again, great vid and it too has got me wanting to go make a lamp lol.

I used DCEN (straight polarity) for this video. silicon bronze welds pretty clean on DCEN
Aluminum bronze welds much cleaner on AC

best,
jody

[castweldsolutions]

Thanks Jody!