Merry Christmas!!
Enjoy!
~John
---------------------------------------------------------------------------------------------------------------------------------------------------
Santa (An Engineering Study)
Recently, a consortium of well-respected scientists from Eastern Montana discussed the probability of Santa. The group met at the National round table of Engineers and Aerospace leaders, Montana headquarters, Haps Bar, located on Railroad Street in Helena. Proxy votes were received from all the attached members, Results of the debate were as follows:
Chairman Wille's findings
I. There are approximately two billion children (persons under 18) in the world. However, since Santa does not visit children of Muslim, Hindu, Jewish or Buddhist religions, this reduces the workload for Christmas night to 15% of the total, or 378 million (according to the Population Reference Bureau). At an average (census) rate of 3.5 children per household, that comes to 108 million homes, presuming that there is at least one good child in each.
Mr. Artz's observations:
II. Santa has about 31 hours of Christmas to work with, thanks to the different time zones and the rotation of the earth, assuming he travels east to west (which seems logical). This works out to 967.7 visits per second. This is to say that for each Christian household with a good child, Santa has around 1/1000th of a second to park the sleigh, hop out, jump down the chimney, fill the stockings, distribute the remaining presents under the tree, eat whatever snacks have been left for him, get back up the chimney, jump into the sleigh and get on to the next house. Assuming that each of these 108 million stops is evenly distributed around the earth (which, of course, we know to be false, but will accept for the purposes of our calculations), we are now talking about 0.78 miles per household; a total trip of 75.5 million miles, not counting bathroom stops or breaks. This means Santa's sleigh is moving at 650 miles per second 3,000 times the speed of sound. For purposes of comparison, the fastest man-made vehicle, the Ulysses space probe, moves at a poky 27.4 miles per second, and a conventional reindeer can run (at best) 15 miles per hour.
Mr. Hogan's Beef:
III. The payload of the sleigh adds another interesting element. Assuming that each child gets nothing more than a medium sized Lego set (two pounds), the sleigh is carrying over 500 thousand tons, not counting Santa himself. On land, a conventional reindeer can pull no more than 300 pounds. Even granting that the "flying" reindeer could pull ten times the normal amount, the job can't be done with eight or even nine of them --- Santa would need 360,000 of them. This increases the payload, not counting the weight of the sleigh, another 54,000 tons, or roughly seven times the weight of the Queen Elizabeth (the ship, not the monarch).
The well respected Mr. Gibson's report:
IV. 600,000 tons traveling at 650 miles per second crates enormous air resistance. This would heat up the reindeer in the same fashion as a spacecraft reentering the earth's atmosphere. The lead pair of reindeer would absorb 14.3 quintillion joules of energy per second each. In short, they would burst into flames almost instantaneously, exposing the reindeer behind them and creating deafening sonic booms in their wake. The entire reindeer team would be vaporized within 4.26 thousandths of a second, or right about the time Santa reached the fifth house on his trip. Not that it matters, however, since Santa, as a result of accelerating from a dead stop to 650 m.p.s. in .001 seconds, would be subjected to centrifugal forces of 17,500 G's. A 250 pound Santa (which seems ludicrously slim) would be pinned to the back of the sleigh by 4,315,015 pounds of force, instantly crushing his bones and organs and reducing him to a quivering blob of pink goo.
Final opinion (binding) provided by Mr. FitzGerald.
V. If Santa did exist, he's dead now.
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
- AKweldshop
-
Weldmonger
-
Posts:
-
Joined:Wed Oct 23, 2013 3:30 pm
-
Location:Palmer AK
Just a couple welders and a couple of big hammers and torches.
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
- Superiorwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 24, 2013 10:13 pm
-
Location:Eddy, TX
Len,
What difference would it make? Sam was a bad boy and wouldn't be getting presents anyway.
-Jonathan
What difference would it make? Sam was a bad boy and wouldn't be getting presents anyway.
-Jonathan
Instagram- @superiorwelding/@learntotig
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
Twitter- @_JonathanLewis
https://www.learntotig.com
https://www.superiorweldandfab.com
https://www.youtube.com/+SuperiorWeldin ... ATHANLEWIS
You know why Santa always has a big smile on his face?
Cuz he knows where all the bad girls live
Heard a good ine on the radio this week.
They were asking some children about Santa and one girl said "My dad is Santa. I know because I saw his pants under Santa's and I could see his hair too."
She then said, wondering, I just wonder how he manages to visit all children...
Cuz he knows where all the bad girls live
Heard a good ine on the radio this week.
They were asking some children about Santa and one girl said "My dad is Santa. I know because I saw his pants under Santa's and I could see his hair too."
She then said, wondering, I just wonder how he manages to visit all children...
Pictures from my scrap collection:
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
http://forum.weldingtipsandtricks.com/v ... f=9&t=5677
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities