General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
Least favorite thing to weld?
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I will go first, any thing painted, it doesn't matter if I clean it back 2 feet from the joint I always burn some! Nasty crap, alright let me have them. :)
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

My least favorite......at one time I did work in a local stamping factory. We would go down into the pits where the conveyors ran and make repairs and installs. You always got metal splinters and ha to throw away whatever you were wearing, gloves, welding jackets, everything. Once you start a repair you don't stop until its done.
-Jonathan
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

That would stink, I hate metal splinters worse than wooden ones.
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar

Pot metal, galvanized , and sewer tractors after they have been in service a while. Nasty
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

anything galvanized
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Galvanized ranks high on my list also lately I've had to deal with a bunch of parts at work that should have been welded but they were silver soildered....trying to get all of that crap out so I can tig frustrates me to say the least.
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
dirtmidget33
  • Posts:
  • Joined:
    Tue May 13, 2014 5:22 pm

ceramic coated headers that are in use repairs, galvanized
why use standard nozzles after gas lens where invented. Kinda of like starting fires by rubbing sticks together.
Top
User avatar
  • Posts:
  • Joined:
    Mon May 12, 2014 12:06 am
  • Location:
    Downey, CA

My worst was repairing a SS airplane muffler...
Glen
Miller Dynasty 200DX - Millermatic 350P - Hypertherm Powermax 45 - Hobart Handler 150
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

admin wrote:Pot metal, galvanized , and sewer tractors after they have been in service a while. Nasty
Like I told Jonathan, that would stink :lol:
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

rusty metal, and galvinized.
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I don't mind rusty unless it is mig, galvanized is as bad as painted in my opinion. :)
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
TamJeff
  • Posts:
  • Joined:
    Tue Dec 04, 2012 4:46 am

Pontoon boats. It's been known for years not to use carpeted trailer bunks for aluminum boats destined for salt water but you can't convince their owners. Nothing like welding dozens of salted pits in aluminum overhead and watching them grow to 3 times their size in an instant.
Miller ABP 330, Syncrowave 250, Dynasty 300 DX.
Honorary member of the Fraternity of Faded Tee Shirts.
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I have never done it but I have heard horror stories of pontoon welding.
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
Antorcha
  • Posts:
  • Joined:
    Fri Dec 06, 2013 8:57 am
  • Location:
    By da lake

Quarter panels. I'll do one for myself but never for someone else.
Top
Adam's Got Skills
  • Posts:
  • Joined:
    Sun Aug 10, 2014 3:32 pm

galvanized or cast iron....well im not to fond of stick welding aluminum either
Top
User avatar
  • Posts:
  • Joined:
    Sat Jul 06, 2013 11:16 am
  • Location:
    Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt

Aluminum that has been in cryogenic service for 40 years. Steel that has been in CO service for any amount of time.

Len
Now go melt something.
Instagram @lenny_gforce

Len
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Old sewer pumping trucks...
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

MinnesotaDave wrote:Old sewer pumping trucks...
That'd be the place for that 6013 s#$t rod...

:lol:
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Otto Nobedder wrote:
MinnesotaDave wrote:Old sewer pumping trucks...
That'd be the place for that 6013 s#$t rod...

:lol:
:D That joke smells as bad as that crappy job with sh1tty pay :D
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 24, 2013 10:13 pm
  • Location:
    Eddy, TX

MinnesotaDave wrote:
Otto Nobedder wrote:
MinnesotaDave wrote:Old sewer pumping trucks...
That'd be the place for that 6013 s#$t rod...

:lol:
:D That joke smells as bad as that crappy job with sh1tty pay :D
Don't let John see this, he will finally be able to say what 6013 is used for. ;) :lol:
-Jonathan
Top
Mongol
  • Posts:
  • Joined:
    Sat Jan 25, 2014 4:56 pm

Other people's mistakes.
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I hear you on that one. I had to repair a disk harrow that someone had put together with bubble gum about 40 years ago. I swear it took a whole grinding wheel to get that crap off. I never would have thought that those welds would have held that long :lol:
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
User avatar
  • Posts:
  • Joined:
    Sun Oct 27, 2013 10:57 pm
  • Location:
    Big Lake/Monticello MN, U.S.A.

Superiorwelding wrote:
MinnesotaDave wrote:
Otto Nobedder wrote:
That'd be the place for that 6013 s#$t rod...

:lol:
:D That joke smells as bad as that crappy job with sh1tty pay :D
Don't let John see this, he will finally be able to say what 6013 is used for. ;) :lol:
-Jonathan
image.jpg
image.jpg (58.26 KiB) Viewed 1157 times
Dave J.

Beware of false knowledge; it is more dangerous than ignorance. ~George Bernard Shaw~

Syncro 350
Invertec v250-s
Thermal Arc 161 and 300
MM210
Dialarc
Tried being normal once, didn't take....I think it was a Tuesday.
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 07, 2014 9:06 pm
  • Location:
    Elizabeth, WV

I totally missed all of this :lol:
It's always best to build your own, especially when it comes to hitches!!!
Matt
Top
newschoppafowah
  • Posts:
  • Joined:
    Wed Feb 19, 2014 11:54 pm

Fencing. Oh dear god, the fencing.

And anything an uninformed friend, family member, etc. thinks "ought to be alright" even after I've politely explained the limitations of 110 volt MIG.

But still, the fencing. How I hate it.
Sent from an earthen ditch outside Needles, CA using an awful lot of low voltage single strand wire.

It's a matter of flour and water and then there's the seasonings, which is a matter of salt and so forth and then you h-we interrupt this for the announc
Top
Post Reply

Return to “Welding Forum General Shop Talk”