Page 1 of 1
Need a new machine
Posted: Fri May 10, 2013 9:31 am
by szanderboyx
Hey all decided to step up to the 21stbone century and buy a newer machine problem is i didnt think out selling the one i have. It is a Lincoln idealarc 300/300 wet torch.
Selling it for a 1k wasnt bright now i only have a grand to spend on a new machine.? Anyone know of a decent ac/dc hivh freq machine for 1kthe to the door?
Re: Need a new machine
Posted: Fri May 10, 2013 4:42 pm
by echosixmike
You can probably get an Everlast 200DX for that kinda money. You're down on output, but get pulse and freq adjustment and use a lot less electricity. S/F.....Ken M
Re: Need a new machine
Posted: Fri May 10, 2013 10:15 pm
by szanderboyx
Will it do all metals under 1/4"?
Re: Need a new machine
Posted: Sat May 11, 2013 1:57 pm
by Otto Nobedder
szanderboyx wrote:Will it do all metals under 1/4"?
Oh, yeah. Just pay attention to the duty cycle if you do 1/4 aluminum. It should even be capable of 3/8" or more aluminum if you have access to helium.
Caveat-- I've never used that machine myself, but I've read many first-person reviews. It's quite capable and versatile.
Steve S
Re: Need a new machine
Posted: Sun May 12, 2013 1:16 am
by szanderboyx
I like what ive read so far but i might have to get the 185sale shipping is expensive
Re: Need a new machine
Posted: Tue May 14, 2013 10:46 am
by szanderboyx
Well i bought the miller diversion 165 i hope it handles my workload any pros cons??
Re: Need a new machine
Posted: Tue May 14, 2013 6:17 pm
by Otto Nobedder
Congratulations!
I've not used the machine, so I can't speak to performance. If 165 is the max amps available in AC as well, you'll still be able to do 3/16" with straight argon, and higher with a helium/argon mix. I rarely weld above 150A in DC, even on heavy sections, as I usually do multiple passes on the thick stuff. If I'm above 150 on anything, I'm in a hurry.
Just read up on the duty cycle, so you don't abuse the machine, and enjoy!
Steve S