Page 1 of 4

Shop Talk huh? WHere is everyone from?

Posted: Sun Dec 11, 2011 11:25 pm
by Greg From K/W
Me I am from K/W. Or Kitchener Waterloo, Ontario Canada. It is one hour south east of Toronto along the 401. To give you an Idea. Where are you guys from?

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 12:06 am
by delraydella
Detroit, across the river from Windsor ON. My grandfather is from Tilsonburg, about a half hour east of London.

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 4:57 am
by weldin mike 27
Hi there,

Bendigo, Thats about 1 1/2 hours north west of Melbourne which is the Capital city of the state of Victoria. Australia.

Mick

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 7:46 am
by fairmont1998
Adelaide, South Australia's capital city. Australia.

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 11:31 am
by cornmuse
Vista and Encinitas = San Diego north county

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 7:24 pm
by Greg From K/W
delraydella wrote:Detroit, across the river from Windsor ON. My grandfather is from Tilsonburg, about a half hour east of London.
A lot of my Family is from the Windsor area. Chatham. Love going to Mexican town when we go down there. El Pocotel is the best Mexican food around IMHO.

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 10:41 pm
by pro mod steve
pearland texas 30 north of galveston.

Re: Shop Talk huh? WHere is everyone from?

Posted: Mon Dec 12, 2011 11:15 pm
by delraydella
One thing we have in Detroit is good mexican food. On any given night, more than half of the cars in the Mexicantown parking lots have Ontario plates, especially when the Red Wings are playing. I can't think of any mexican food places in Windsor, except for Taco Bell.

Never been to El Pocotel, though. I'll have to try them out.

Re: Shop Talk huh? WHere is everyone from?

Posted: Tue Dec 13, 2011 12:15 am
by Greg From K/W
Their Chicken Fajitas with cheese are incredible. They ruined me for fajitas though. I won't order any fajitas from anywhere else now. The mexican sandwich is also a hit.

Re: Shop Talk huh? WHere is everyone from?

Posted: Thu Jan 05, 2012 10:11 pm
by Boilermaker
Retired Boilermaker from the Philadelphia, PA area.
Best Cheese Steaks (and Welders) in the country!

Re: Shop Talk huh? WHere is everyone from?

Posted: Fri Jan 06, 2012 6:51 pm
by Otto Nobedder
Southern Louisiana, USA. Near Covington, about 40 minutes north of New Orleans.

Can't wait to get home and boil a sack of crawfish!

Steve

Re: Shop Talk huh? WHere is everyone from?

Posted: Fri Jan 06, 2012 7:36 pm
by weldin mike 27
Hi there,

Did you cop it from that hurricane a few years back?

Mick

Re: Shop Talk huh? WHere is everyone from?

Posted: Fri Jan 06, 2012 10:56 pm
by Otto Nobedder
Mick, I'm a recent transplant to Louisiana. My wife is from the area, but we lived in the middle of the U.S. for many years. We were not there during hurricane Katrina, thank God. Now, five years later, there are still areas that look like they were bombed in war. Our dear friends, who offered me the space my camper sits upon, were in their living room in their trailer-house watching the weather on TV when the storm blew down a tree. It was a 150+ year old pine. It split their bedroom in half, and literally folded their bed in half. Had they been there, they would not be with us now.

When I'm not on the road working, I spend a little time each day helping to clean up the damage. I've been at it for three years.

Steve

Re: Shop Talk huh? WHere is everyone from?

Posted: Sat Jan 07, 2012 12:25 pm
by Ultralow787
I'm from Mono, Ontario, Canada. About 1 hour Northwest of Toronto and 1 hour and 20 minutes from Greg!
It's interesting to read where everyone is from! I have been to most of the places such as Galveston, New Orleans, Detroit, & close to Philadelphia! Australia is definitely on my Bucket List!

Re: Shop Talk huh? WHere is everyone from?

Posted: Wed Jan 11, 2012 4:28 pm
by xalky
I'm from central Connecticut...That's in the USA for you guys that aint from here. I've been MIG welding since the mid 1980s but just recently bought a TIG/Plasma machine. I was in awe when I cut my first piece of steel with the plasma. Unfortunately my TIG skills need a lot of work but I'll get the hang of it. I was able to run a decent bead last night on some mild steel after screwing around and burning up Tungsten for about an hour before getting some settings dialed in. I need scrap, and lots of it, to get some practice in. :oops:

Re: Shop Talk huh? WHere is everyone from?

Posted: Thu Jan 12, 2012 7:06 am
by weldin mike 27
Hey there,

If you go to a fab shop that has a guillotine, they might let you scrounge around for some off cuts from behind it. Unless they're tight.

Mick

Re: Shop Talk huh? WHere is everyone from?

Posted: Thu Jan 12, 2012 10:38 am
by delraydella
scrap is too valuable over here to just give away. They'll be happy to sell you the drops at a higher cost per pound than the scrap yard, otherwise they would be flooded with scrappers looking to make a quick buck.

Re: Shop Talk huh? WHere is everyone from?

Posted: Thu Jan 12, 2012 1:59 pm
by weldin mike 27
Hey there,

I didn't think of it that way. Gotta protect your bottom line, don't ya. And protect ya self from scrappers (locusts) LOL

Mick

Re: Shop Talk huh? WHere is everyone from?

Posted: Fri Jan 13, 2012 7:27 pm
by opiesvtx
Minneapolis Minnesota.

Re: Shop Talk huh? WHere is everyone from?

Posted: Fri Jan 13, 2012 9:05 pm
by powrguy
Northeast Ohio (Strongsville)

Re: Shop Talk huh? WHere is everyone from?

Posted: Sat Jan 14, 2012 12:53 pm
by Raider
Morning Welder's

I'm from Durand Michigan thats in mid-michigan USA , (about 1 1/2 hrs nw from Detroit, but I still work down there)

The Mexican food is great down in mexican town when we get the chance to get down there. Have you ever tried "Little Armando's" ???? And I too have a lot of family from Canada (My Dad was from north of winnipeg, Manitoba and still have family in most provinces) My Dad started me stick welding when I was 11. I'm now 55 and it has been a Great Career and still is!!!!

I've worked over the years at Railcar repair, Shop Fab, pipeline (Out of local 190) machine building/tool and die and now as a maint welder.

I do a lot of fab work at my current job, but also Pipe (Live steam) and tool and die, also a lot of machine repair welding (I'm certified 6-G pipe and weld School trained).

Hey "Mick" I almost made it down your way in 1975 when I was in the Marines, but we were turned around to evac Saigon when south Vietnam fell. But still hope to make it down there one day.

Re: Shop Talk huh? WHere is everyone from?

Posted: Tue Jan 17, 2012 1:43 am
by weldin mike 27
Hi there,

Hope you can make it down for a holiday in peace time eh? Although the exchange rate kind of sucks at the moment.

Other Mick

Re: Shop Talk huh? WHere is everyone from?

Posted: Wed Jan 18, 2012 7:15 pm
by delraydella
Raider,

I've been to Armandos many, many times. They have some of the freshest guacamole you could ever ask for. Good food,too! A lot of the latino players from the Detroit Tigers used to eat there when they were in town.


My shop is about 5 miles from the mexicantown restaurant area.

Re: Shop Talk huh? WHere is everyone from?

Posted: Wed Jan 18, 2012 8:26 pm
by Raider
delraydella wrote:Raider,

I've been to Armandos many, many times. They have some of the freshest guacamole you could ever ask for. Good food,too! A lot of the latino players from the Detroit Tigers used to eat there when they were in town.


My shop is about 5 miles from the mexicantown restaurant area.
Hi detraydella,

Yes the best guacamole I have ever had!!! Another good place is in Livonia "Coyote Loco" on plymouth Rd, Great carry out.......5 miles No Kiddin, what shop are you working at? I'm working over at Detroit Diesel off I-96 and Telegraph

Mike S

Re: Shop Talk huh? WHere is everyone from?

Posted: Wed Jan 18, 2012 8:41 pm
by Raider
weldin mike 27 wrote:Hi there,

Hope you can make it down for a holiday in peace time eh? Although the exchange rate kind of sucks at the moment.

Other Mick
Hey Mick,

Yes, one day, I think right now no matter where you go the exchange rate is not what it used to be. This year it will be florida to see my son when he gets back from his latest tour in Afghanistan.

You do any pipe-welding? I;m looking for a stainless steel mirror to see to weld the backside if some HP pipe in concret trench not much room to see down there and the usual glass inspection mirrors don't last to long doing this. Anybody else know where I can get one????????

Mike S