That is a dream
Sent from my ZTE T83 using Tapatalk
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
Tools - check!
Bike - check!
Chillis - double check!
Nice. What bike is that?
Kym
Bike - check!
Chillis - double check!
Nice. What bike is that?
Kym
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Waaayyy tooo clean! He even has organizer bins. What kinda shit is that? Doesn't everybody just throw nuts and bolts in a coffee can and then have to dump it out on the table to find something? 
Nice looking peppers though. What kind are they? I grew Moruga Scorpions once....OMG were they HOT!
Nice looking peppers though. What kind are they? I grew Moruga Scorpions once....OMG were they HOT!Ifyoucantellmewhatthissaysiwillbuyyouabeer.
The garage was full of tools, no space for WerkSpace
so, I bought a mobile shop and a shop for the mobile.
$1500 for the mobile + $500 for the new diesel engine.
$50,000 for the shop + lots of money to fix it all up.
so, I bought a mobile shop and a shop for the mobile.
$1500 for the mobile + $500 for the new diesel engine.
$50,000 for the shop + lots of money to fix it all up.
- Attachments
-
- SnapOn Truck 1.jpg (66.5 KiB) Viewed 1564 times
-
- Looking East from inside.jpg (73.42 KiB) Viewed 1564 times
- MosquitoMoto
-
Weldmonger
-
Posts:
-
Joined:Sat Aug 01, 2015 8:38 am
-
Location:The Land Down Under
So. Much. Space.
That is the goal. A workshop/shed big enough so that every time I see a bike for sale that needs some work, I can roll it in there and just add it to the queue, rather than thinking "I'd buy that...if I had anywhere to put it."
Great stuff, WerkSpace. Living the dream.
Kym
That is the goal. A workshop/shed big enough so that every time I see a bike for sale that needs some work, I can roll it in there and just add it to the queue, rather than thinking "I'd buy that...if I had anywhere to put it."
Great stuff, WerkSpace. Living the dream.
Kym
Right! I think I'm doing good just to have half a garage! I wouldn't even know where to start with a place like that!MosquitoMoto wrote:So. Much. Space.
That is the goal. A workshop/shed big enough so that every time I see a bike for sale that needs some work, I can roll it in there and just add it to the queue, rather than thinking "I'd buy that...if I had anywhere to put it."
Great stuff, WerkSpace. Living the dream.
Kym
Werkspace, any chance you're in North Texas and need a hand from time to time?
Instagram: @nathanppiatt
Owner/welder at Homegrown Metal Fab
Lincoln Weld-Pak 125 HD
Lincoln AC/DC 225/125
Lincoln Port-a-torch
30" 40 ton homegrown press brake
Northern Industrial1HP 3/4" chuck, 16 speed drill press
Owner/welder at Homegrown Metal Fab
Lincoln Weld-Pak 125 HD
Lincoln AC/DC 225/125
Lincoln Port-a-torch
30" 40 ton homegrown press brake
Northern Industrial1HP 3/4" chuck, 16 speed drill press
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
I have just enough space inside for home jobs, but I would really like more concreted area around the doors of my garage, so you don't have to lay down in filth for bigger jobs
Sent from my ZTE T83 using Tapatalk
Sent from my ZTE T83 using Tapatalk
ex framie
- ex framie
-
Ace
-
Posts:
-
Joined:Sun Aug 09, 2015 1:09 am
-
Location:Brisbane QLD Land of oz
My wallet just spun out at the sight of the old snapon truck.
The sneaky bugger even had a take it now, pay it off, scheme, only thing was you always found something else to buy and pay, it never ended.
The 12 step anti snapon ceremony did work, 12 steps down ths aisle of a church..........
Say I do, had over your wallet and testicals, all good now
Werkspace,
Just what you needed, another project.
Waiting for the finished product, should be good.
The sneaky bugger even had a take it now, pay it off, scheme, only thing was you always found something else to buy and pay, it never ended.
The 12 step anti snapon ceremony did work, 12 steps down ths aisle of a church..........
Say I do, had over your wallet and testicals, all good now
Werkspace,
Just what you needed, another project.
Waiting for the finished product, should be good.
Pete
God gave man 2 heads and only enough blood to run 1 at a time. Who said God didn't have a sense of humour.....
God gave man 2 heads and only enough blood to run 1 at a time. Who said God didn't have a sense of humour.....
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Whilst we are on the subject of snap on(not str.. on) stay away from their welding products, The value that the hand tools represent doesn't carry over to their migs/auto darkening shields. A community service announcement.
exnailpounder
- exnailpounder
-
Weldmonger
-
Posts:
-
Joined:Thu Dec 25, 2014 9:25 am
-
Location:near Chicago
Agreed. Snapon over here is the same way. The tools are top shelf but they buy welders and welding equipment from somewhere and re-brand them. The mechanic that does my brakes has a small Snapon Mig for exhaust and I checked it out....POS.weldin mike 27 wrote:Whilst we are on the subject of snap on(not str.. on) stay away from their welding products, The value that the hand tools represent doesn't carry over to their migs/auto darkening shields. A community service announcement.
Ifyoucantellmewhatthissaysiwillbuyyouabeer.
- weldin mike 27
-
Weldmonger
-
Posts:
-
Joined:Fri Apr 01, 2011 10:59 pm
-
Location:Australia; Victoria
Don't strap on the snap on.
Sent from my ZTE T83 using Tapatalk
Sent from my ZTE T83 using Tapatalk
My local craigslist is STUFFED with those stupid snap on welders. Everyone is convinced they are made of gold, cause they're asking Miller prices for them. Makes you want to contact them and find out if they are crazy or just misled.
Instagram: @nathanppiatt
Owner/welder at Homegrown Metal Fab
Lincoln Weld-Pak 125 HD
Lincoln AC/DC 225/125
Lincoln Port-a-torch
30" 40 ton homegrown press brake
Northern Industrial1HP 3/4" chuck, 16 speed drill press
Owner/welder at Homegrown Metal Fab
Lincoln Weld-Pak 125 HD
Lincoln AC/DC 225/125
Lincoln Port-a-torch
30" 40 ton homegrown press brake
Northern Industrial1HP 3/4" chuck, 16 speed drill press
This is my workshop, built in 2013-2014. I am mainly woodworking oriented but I do have a stick welder (Kemppi super kempak, old single phase rectifier from the 80s). All metalworking is done on the concrete plate I have infront of the garage port.
It's the latest pic I got, I was painting the floor here, it's about 30 square meters in size. In the future I will build a 25m2 cold storage shed and move a lot of stuff out there which will free up a neighboring room for more equipment, perhaps a little reloading corner...
It's the latest pic I got, I was painting the floor here, it's about 30 square meters in size. In the future I will build a 25m2 cold storage shed and move a lot of stuff out there which will free up a neighboring room for more equipment, perhaps a little reloading corner...
John Chamorro
- John Chamorro
-
Guide
-
Posts:
-
Joined:Thu Mar 19, 2015 9:44 am
-
Location:San Antonio Valley Peoples Republic of Californy
We built this in 1999. There's a long short story behind it but enough to say for now that it was my wife's idea to build a shop instead of a new house.
The house came 6 years later.
- shop shot.JPG (67.47 KiB) Viewed 1533 times
- house.jpg (56.55 KiB) Viewed 1533 times
I don't know it all but I'm working on it.
GreinTime
- GreinTime
-
Weldmonger
-
Posts:
-
Joined:Fri Nov 01, 2013 11:20 am
-
Location:Pittsburgh, PA
Hey man, if the shop pays for the house, you're doing something right!John Chamorro wrote:We built this in 1999. There's a long short story behind it but enough to say for now that it was my wife's idea to build a shop instead of a new house. The house came 6 years later.
Sent from my SM-G900V using Tapatalk
#oneleggedproblems
-=Sam=-
-=Sam=-