Hi Mike S. (Raider),
It's a small world, I buy a lot of stuff at the Production Tool across the street from you. Never ate at "Coyote Loco" but I'll be sure to give it a try. I work at West End Studios in Detroit, we build exhibits and displays, mostly for trade shows and museums. We work on live shows and concerts too sometimes, but I mostly stay in the shop now. I'm getting too old to push around road crates all day!
Steve
General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
delraydella
- delraydella
-
Weldmonger
-
Posts:
-
Joined:Mon Apr 25, 2011 7:35 pm
-
Location:Detroit, MI
Welding☞Syncrowave 250,Millermatic 252,30a Spoolgun Cutting☞12" Hi-speed Cutoff Saw, 9x 12 Horizontal Bandsaw Milling☞Gorton 8d Vertical Mill Turning☞Monarch EE Precision Lathe Grinding ☞Brown & Sharpe #5 Surface Grinder
packermarine78
- packermarine78
-
New Member
-
Posts:
-
Joined:Wed Jan 25, 2012 12:27 am
Hi Welders,
I'm an electrician from Boulder Creek CA, up HWY 9 from Santa Cruz, about 50 miles north of Monterey. Thanks to Jody and his videos which seem to educate and demystify the welding process, I bought some used Miller gear to start welding with.
Looking for a Miller PC 300 Pulse Controller if anyone might point me in the right direction.
Thanks,
T
I'm an electrician from Boulder Creek CA, up HWY 9 from Santa Cruz, about 50 miles north of Monterey. Thanks to Jody and his videos which seem to educate and demystify the welding process, I bought some used Miller gear to start welding with.
Looking for a Miller PC 300 Pulse Controller if anyone might point me in the right direction.
Thanks,
T
liquidmetal
- liquidmetal
-
New Member
-
Posts:
-
Joined:Tue Feb 21, 2012 4:36 pm
rahtreelimbs
- rahtreelimbs
-
Heavy Hitter
-
Posts:
-
Joined:Mon Jun 14, 2010 10:39 pm
I,m from Pembroke ,NC been welding for 2 years now getting alot of hood time not in the field i'm looking for. Hoping to get in the pipeline or in the power field .I will take any job i can to get in because I think I got the skills to move up.
getmoney06
- getmoney06
-
New Member
-
Posts:
-
Joined:Sun Mar 11, 2012 8:31 pm
Hi,
New on the forum - I'm from Denmark, been working as a welder in ~10 years now.
Finally got orderet my tig-finger. Why didn't i do that for long time ago? It is really good, I use it everyday.
New on the forum - I'm from Denmark, been working as a welder in ~10 years now.
Finally got orderet my tig-finger. Why didn't i do that for long time ago? It is really good, I use it everyday.
Migatronic Automig 233 MPS
Migatronic Sigma² 400 Pulse CW
Migatronic Pilot 2400 HP
Migatronic Sigma² 400 Pulse CW
Migatronic Pilot 2400 HP
tscmansfield
- tscmansfield
-
New Member
-
Posts:
-
Joined:Wed Apr 11, 2012 11:37 am
I am looking for welders in the Dallas Fort Worth Texas area. I would appreciate any leads, if you or if you know someone who is looking for a welding job let them know to call me @817.453.5522 my name is Frank. Thank you and have a great day.
BlackCatBonz
- BlackCatBonz
-
New Member
-
Posts:
-
Joined:Fri Nov 18, 2011 3:41 am
-
Location:Toronto
Cobourg ON... about 90 minutes east of Toronto.
Shawn Bailey
Sprinklerfitter Guru / Steamfitter Apprentice / Welder
Sprinklerfitter Guru / Steamfitter Apprentice / Welder
I'm from appleton, Wisconsin. the home of Miller electric. I have done tons of work there over the years. I used to work construction, custom fabrication and steel erection, now I build and install bridge cranes all over the state. pays good , scenery changes often. Dan.
Curious George
- Curious George
-
New Member
-
Posts:
-
Joined:Sat Jun 02, 2012 1:08 pm
-
Location:Toronto, Ont
Toronto, now. Born and raised in KW though. Mostly bluevale and fairview areas.
-- If you can't fix it with a hammer, you've got an electrical problem
- winky
-
Active Member
-
Posts:
-
Joined:Wed May 30, 2012 10:07 am
-
Location:Oregon
-
Contact:
Born and raised on the central Calif coast ... now live in central west Oregon just a few years away from collecting social security if there is any left.
... going as fast as I can with one eye closed.
Everlast Powertig 200DX
Miller Thunderbolt 225
Lincoln 180c Mig
Hobart Handler 125
Everlast Powertig 200DX
Miller Thunderbolt 225
Lincoln 180c Mig
Hobart Handler 125
Return to “Welding Forum General Shop Talk”
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities