[KTMrider]

I bought a new CertiFlat table recently and I'm in need of table clamps. Does anyone have any recommendations for reasonably priced clamping kits? Feel free to show off your clamps, fixtures and tables.


Sent from my iPhone using Tapatalk

[RamboBaby]

You can get a 400 amp bronze clamp at harbor freight for about $15.

[Otto Nobedder]

You can get a 400 amp bronze clamp at harbor freight for about $15.

That's not even close to what he's after...

Fixture clamps for the table, not ground clamps for the welder.

Steve S

[ldbtx]

StrongHand Tools makes a line of clamps and fixturing devices for 5/8" holes.

[KTMrider]

Thanks folks.


Sent from my iPhone using Tapatalk

[houdni]

get ready to spend some $$$ on fixturing ...i try to spend a few at a time and things i would need....stronghand is what i usually get...maybe someday ill get a stronghand table

[RamboBaby]

I'd love to have an aluminum stronghand table with full fixturing package....maybe when I win the lottery.

[Otto Nobedder]

You can get a 400 amp bronze clamp at harbor freight for about $15.

That's not even close to what he's after...

Fixture clamps for the table, not ground clamps for the welder.

Steve S

In re-reading the thread, I realized in my haste to type out a response I sounded rather short. My intention was a short answer, but not to sound curt... If it came off that way, I apologize.

Steve S

[RamboBaby]

I didn't take it personally but thanks.

[KTMrider]

I scored some Stronghand 4-1 clamps from Enco when they had their 25% off and free shipping sale. Unfortunately, they do not sell table clamps.


Sent from my iPhone using Tapatalk