General welding questions that dont fit in TIG, MIG, Stick, or Certification etc.
What the hell were you thinking?
Post Reply
User avatar
  • Posts:
  • Joined:
    Tue Feb 24, 2015 10:53 am
  • Location:
    Indiana

My bad. I accidentally hit the private message button (didn't know that it would be a PM). Ment to say thanks guys in public insted of sending a Private one to Otto. :lol:
"I am in competition with no one. I have no desire to play the game of being better than anyone. I am simply trying to be better than the person I was yesterday."
Top
jwright650
  • Posts:
  • Joined:
    Wed Dec 03, 2014 3:27 pm

Cricket wrote:
WerkSpace wrote:If you happen to have 300 hours of spare time, 7,000 American nickels
and the desire to make 35,000 welds, then you can make a nickel couch.
Interesting.... Technically the currency belongs to the state and any misuse of the banknotes or the coins is illegal and punishable. For example it is illegal to damage\melt\drill the coin.
Obviously 7000 X $0.05=$350 isn't enough for the Treasury to bother... :roll:
So...do you think he will take $350 for that couch? :shock:
I could pay for it with 7000 nickels so he could make another couch for himself(provided the coins are still legible and have not been defaced during construction)
John Wright
AWS Certified Welding Inspector
NDT Level II UT, VT, MT and PT
NACE CIP Level I Coating Inspector
Top
jwright650
  • Posts:
  • Joined:
    Wed Dec 03, 2014 3:27 pm

Otto Nobedder wrote:Pnkflyd,

As much as I appreciate your avatar (the album cover), it's your signature line I like best!

Steve S
Ditto 8-)
John Wright
AWS Certified Welding Inspector
NDT Level II UT, VT, MT and PT
NACE CIP Level I Coating Inspector
Top
Artie F. Emm
  • Posts:
  • Joined:
    Thu Jul 24, 2014 7:53 am

WerkSpace wrote:If you happen to have 300 hours of spare time, 7,000 American nickels
and the desire to make 35,000 welds, then you can make a nickel couch.
And his wife STILL makes him keep it outside.
Dave
aka "RTFM"
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Artie F. Emm wrote:
WerkSpace wrote:If you happen to have 300 hours of spare time, 7,000 American nickels
and the desire to make 35,000 welds, then you can make a nickel couch.
And his wife STILL makes him keep it outside.
Lol
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
Rick_H
  • Posts:
  • Joined:
    Sat Feb 08, 2014 1:50 pm
  • Location:
    PA/MD

Artie F. Emm wrote:
WerkSpace wrote:If you happen to have 300 hours of spare time, 7,000 American nickels
and the desire to make 35,000 welds, then you can make a nickel couch.
And his wife STILL makes him keep it outside.
Lol
I weld stainless, stainless and more stainless...Food Industry, sanitary process piping, vessels, whatever is needed, I like to make stuff.
ASME IX, AWS 17.1, D1.1
Instagram #RNHFAB
Top
Drifta-X
  • Posts:
  • Joined:
    Mon May 26, 2014 2:53 am
  • Location:
    Melbourne Australia

All I got atm.
From school one yr ago.
10mm plate, 1g, no backing.
6013 1/8
Attachments
Trade school
Trade school
image.jpg (79.74 KiB) Viewed 1698 times
I have a soldering iron!
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

I did an overhead butt weld at school that the teacher said was the worst weld he's ever seen.
Top
User avatar
  • Posts:
  • Joined:
    Sat Jul 06, 2013 11:16 am
  • Location:
    Near Pittsburgh,Pennsylvania. Steel Buckle of the Rust Belt

Mick,
That's because your teacher never saw the weld I put on my broken bicycle at 5 years old with an old Lincoln tomstone with an 1/8" 6013 that half the flux was broken off. He would have had a whole new standard to judge welds by. :) It's a good thing everybody didn't have phones with cameras in them back then or my older brothers would still be showing everyone those pictures.

Len
Now go melt something.
Instagram @lenny_gforce

Len
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

True. I feel sad for these generations where every instant is caught on tape.
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

Although, mine was 20+ years old, 3rd year apprentice in a welding competition with about 6+years of stick welding practice. I just didn't "click" the 7016 o/h
Top
motox
  • Posts:
  • Joined:
    Thu Nov 28, 2013 12:49 pm
  • Location:
    Delaware

when i moved to the jersey shore in 66 my then
boss loved to build equipment for work but he
couldn't weld worth a damn. his idea of welding
was to burn great amount of rod on the work
(giant pile of fido). then his buddy a retired
union guy would grind all the crap off and re-weld
it. he would refer to the old welds as "welding my weight"
craig
htp invertig 221
syncrowave 250
miller 140 mig
hypertherm plasma
morse 14 metal devil
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

The bigger the better. Akin to "I just do another run, that'll help"
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Image

Image
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

Image

Image

Image
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Fri Apr 01, 2011 10:59 pm
  • Location:
    Australia; Victoria

That's a whole lot of nope right there. Those last two aren't finished yet, not ground flush with a flap wheel.
Top
User avatar
  • Posts:
  • Joined:
    Wed Oct 23, 2013 3:30 pm
  • Location:
    Palmer AK

weldin mike 27 wrote:That's a whole lot of nope right there. Those last two aren't finished yet, not ground flush with a flap wheel.

Yeah, calling that bird poop would be insulting to the birds.
Just a couple welders and a couple of big hammers and torches.

Men in dirty jeans built this country, while men in clean suits have destroyed it.
Trump/Carson 2016-2024
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

I've welded better while under the influence of LSD.

Not kidding...
Top
jesse
  • Posts:
  • Joined:
    Thu Feb 26, 2015 2:42 pm

I've welded better while under the influence of LSD.

Not kidding
Dude you are my hero. I bet it was hard to tell where the real arc began and the visuals ended.
Top
Artie F. Emm
  • Posts:
  • Joined:
    Thu Jul 24, 2014 7:53 am

OK, so what's scariest?
a. the fact that somebody thought it was a good idea
b. tan shirt guy appears to be ballast
c. boss man supervising, upper left
d. the guy watching >from underneath<, lower left
forklift.jpg
forklift.jpg (33.33 KiB) Viewed 1731 times
Dave
aka "RTFM"
Top
Wes917
  • Posts:
  • Joined:
    Fri Oct 25, 2013 11:45 pm

Where's E.) all of the above
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 27, 2015 11:28 am
  • Location:
    Minnesota

Otto Nobedder wrote:I've welded better while under the influence of LSD.

Not kidding...
Interesting...

Bet it was neat looking!?!?
"We can't solve problems by using the same kind of thinking we used when we created them."
Top
User avatar
  • Posts:
  • Joined:
    Thu Jan 06, 2011 11:40 pm
  • Location:
    Near New Orleans

Welding on LSD was an eye-opener. For a brief moment in time, I was Yoda, in touch with the force. Sensing the puddle; Seeing the scent of it; feeling the color, hearing the heat...

;)

Steve S
Top
User avatar
  • Posts:
  • Joined:
    Tue Jan 27, 2015 11:28 am
  • Location:
    Minnesota

Mmmmmmmgh... The power of the arc light is strong with this one.
"We can't solve problems by using the same kind of thinking we used when we created them."
Top
jwright650
  • Posts:
  • Joined:
    Wed Dec 03, 2014 3:27 pm

Image
I am comforted by the fact that they took time to grind the mill scale off of the materials before attempting to .....uh..."weld" it, otherwise the filler wire would have not even stuck to the material.

What I'm scared of is that I may be meeting this vehicle on the highway one day....it's not a good idea to cut and weld the leafspring eyes.
John Wright
AWS Certified Welding Inspector
NDT Level II UT, VT, MT and PT
NACE CIP Level I Coating Inspector
Top
Post Reply

Return to “Welding Forum General Shop Talk”