- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Good stuff!
It's been a while, but I've done all of this except the open-root on ceramic (though I've done it since with E308 hard wire in both short-circuit and spray).
I did pick up a great tip that I'm stunned never occurred to me on my own... cone-grinding the end of a liner for centering and optimum contact. I'll be doing this at liner and/or diffuser changes from now on.
Great set of tips, and good troubleshooting guide.
Steve S
It's been a while, but I've done all of this except the open-root on ceramic (though I've done it since with E308 hard wire in both short-circuit and spray).
I did pick up a great tip that I'm stunned never occurred to me on my own... cone-grinding the end of a liner for centering and optimum contact. I'll be doing this at liner and/or diffuser changes from now on.
Great set of tips, and good troubleshooting guide.
Steve S
ESAB correspondance curse
Very complete with a good interactive interface
Works on cell phones
http://www.esabna.com/euweb/awtc/lesson1_1.htm
Very complete with a good interactive interface
Works on cell phones
http://www.esabna.com/euweb/awtc/lesson1_1.htm
Pianos , restorer and tuner
Dedicated to learn welding since april
slowly learning
not complaining of doing beads and beads
pro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Dedicated to learn welding since april
slowly learning
not complaining of doing beads and beadspro inverter PROGYS 200 FV PFC CEL+tig lift
OA Oxyflam 1000 cutting and welding gas torch
Farmwelding
- Farmwelding
-
Weldmonger
-
Posts:
-
Joined:Thu Mar 10, 2016 11:37 pm
-
Location:Wisconsin
I see what you did thereColdman wrote:We are not allowed to curse on this forum otherwise we might get drama from Otto.
No wait - he's already gone all dramatic!
A student now but really want to weld everyday. Want to learn everything about everything. Want to become a knower of all and master of none.
Instagram: @farmwelding
Nick
Instagram: @farmwelding
Nick
- LtBadd
-
Weldmonger
-
Posts:
-
Joined:Sun Apr 12, 2015 4:00 pm
-
Location:Clearwater FL
-
Contact:
Now that is quite the...expressionColdman wrote:Well I'm not as eloquent as exie but in his absence we must mold clay such as we have even if he be the veriest varlet that ever chewed with a tooth.
Sent using Tapatalk
I'm trying to conjure an image in my mind but it eludes me Richard
Website
Website