These books are downloaded in pdf format for free.
http://www.millerwelds.com/resources/bo ... hlets.html
- Otto Nobedder
-
Weldmonger
-
Posts:
-
Joined:Thu Jan 06, 2011 11:40 pm
-
Location:Near New Orleans
Glanced though everything you put up. Great resources!
I'm going to enjoy taking a closer look at metal spinning. I've seen it done in a 5-minute blurb on one of those "how do they?" style shows.
Steve S
I'm going to enjoy taking a closer look at metal spinning. I've seen it done in a 5-minute blurb on one of those "how do they?" style shows.
Steve S
Tassie Dave
- Tassie Dave
-
Active Member
-
Posts:
-
Joined:Wed Sep 03, 2014 2:04 am
-
Location:Tasmania
Werkspace
Man you are a legend.
I dont suppose you know where you can get a booklet on flux cored gasless mig welding by any chance.
Any help on this would be great.
Stick i am ok but flux cored which i don't use if i can help it i have to use sometimes. Hate that stuff with a passion but you have to use what you are given.
Cheers
Dave
Man you are a legend.
I dont suppose you know where you can get a booklet on flux cored gasless mig welding by any chance.
Any help on this would be great.
Stick i am ok but flux cored which i don't use if i can help it i have to use sometimes. Hate that stuff with a passion but you have to use what you are given.
Cheers
Dave
I have an
Esab LHQ 150
Pro Weld TC256 ACDC multi process Tig Cut MMA
WeldSmart Mig 200IGBT Mig Tig MMA and spool gun
Esab LHQ 150
Pro Weld TC256 ACDC multi process Tig Cut MMA
WeldSmart Mig 200IGBT Mig Tig MMA and spool gun