Ok. I got 125ft of 10/4. Made myself 100ft and a 25ft extension. Runs great!
Sent from my iPhone using Tapatalk

Nice! Thanks for the info. Guy was pulling my leg. Headed to Home Depot!


Sent from my iPhone using Tapatalk

Nice!


Sent from my iPhone using Tapatalk

I'd like to make an extension cord for my welder. I was told that I couldn't make an extension bigger than 4ft. What the longest I can make a 220 extension? I need about 75-100ft.


Sent from my iPhone using Tapatalk

Very nice. I'm looking for ideas as well.


Sent from my iPhone using Tapatalk

I have both power supplies available. Hobby at the moment. Make some money. But don't survive off welding. Not yet at least. 200 amps should be enough for me. I was looking at the Lincoln 210 mp.


Sent from my iPhone using Tapatalk

Learned how stick weld first. Now looking into a mig welder to learn the process. I don't have anything specific to use it for, but I'd like to have one around to use on future projects. Questions: What is a mig welder mainly used for? I have the impression that mig welding is for thin material. Wha...

Sent from my iPhone using Tapatalk

Need to grind all the mess ups.


Sent from my iPhone using Tapatalk

Offset.

I'll post some more when it's closer to being done.


Sent from my iPhone using Tapatalk

Pit I'm putting together for a friend of mine. 20" casing 1/4" thick. Beginner home welder. Using an Everlast 200st.


Sent from my iPhone using Tapatalk

I recently purchased an Everlast 200st. Little box is a beast. I'm a starter just like you. Welder cost me $375. Does 200 amp Oma 240 connection. Also does the 120 connection as well. Done three BBQ pits with her and she rocks! http://images.tapatalk-cdn.com/15/09/13/951bfb18b4165114bec4978b5db71205...

Thank You for the great info!

Thanks. Sorry if i was missing info. 1/4 inch thick 20 inch diameter round casing. 36 inches long. Thank you for the tip. Now I'm going on youtube to learn math.

When welding legs to a BBQ pit. What method do you all use to get them aligned correctly. Im a beginner and would like some insight on this topic. I don't have pipe stands or a hoist at the moment. Im working off the floor. I am current using square tubing cut at 45 degree then welded to the casing....

First timer is correct. Thanks for the replies. How many amps are you running the 3/32 7018 rods? 1/8 7018? I went back and ran them at about the recommended amps and what a difference. I noticed that the 3/32 6011 ran good on the regular setup as well. At the moment all I'm doing is burning rods si...

New to welding. I have a Powerarc 200ST. I was practicing yesterday. I ran some lincoln e6011 3/32 and e7014 3/32. The 6011 rods would burn really fast and would turn off on me. Couple of time the rods stuck and turn red really quick. I was running about 80 amps. The 7014 rods i had trouble keeping ...

Thank You! I appreciate the welcome!

New to welding. Recently bought a Everlast PowerArc 200ST. Looking to learn and get as much help as possible. Starting off as a hobbyist and hopefully ill take off from there.