Welded some more on roll cage. Lots of people wanting work done. Thanks John.

Welded this aluminum boat rack for fishing pole and net storage. Had some trouble with the tubing bringing lots of crud up into the weld. never had this problem. Any ideas? Thanks John.

Pretty cool! I used to own a Diversion 180 and I would have bought this pulser from you. On a side note-that one video where you are pulsing between 10 and 40 pps is going to give someone a seizure. I'm with Jody either 1 pps or over 30 pps. Again, great product. Thanks John

Thanks for another informative and great video! HF in AC only? John

I agree with superior welding.

Pretty cool idea!

So here is the setup. At first I didn't like the button position but then I learned to position my hand differently. This is the position I didn't like because everytime you push the button it would transfer to the tungsten moving downward. The next picture is a way I figured to hold the torch more ...

Thanks for the info guys. John

Thanks for all the tips and advice Big Gear Head. On the subject of roll cage fabrication for people do I need to be worried about any liability if someone gets hurt in a wreck at the track? Figured u might be able to shed some insight as u have built a few. Thanks John

cutmaster 42

Here is a stainless header flange showing the colors.

Afr-here is another picture view. The weld is somewhat flat but this image shows it a little better of the profile. Step and pause technique, no pulse, and complete penetration to the mild steel tubing. If a person doesn't have color on anything that you weld, than your heat range is off or you need...

Thanks Big Gear Head! Nhra tech coming to look at cage, answer some questions and look at welds. Hopefully he will like everything. John

Welding roll cage.

Nice!

only problem is I'm used to having foot pedal and my foot keeps wanting to floor an invisible pedal. the torch switch is taking some time to get used to but is certainly getting easier. one less thing to drag around inside car.

Thanks Steve.

Thanks.

getting better at tubing fit ups.

Great video!

Nice work Ralph!

Lookin good big d.

Afr looks good.

Thanks Kym.

welcome to the forum. john

Thanks I appreciate the comments. Ive been practicing and wasting a lot of money and finally I feel like this will do. John