Search found 7 matches

by mantree
Sat Feb 21, 2015 10:55 am
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Re: Welding round tube to flat stock

I have the weekend off next week so I will try to get in to the shop since it is to cold to be doing wiring on the bike
by mantree
Mon Feb 16, 2015 3:26 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Re: Welding round tube to flat stock

So this morning I had a bit of a break threw on a less challenging method there for less likely to screw it up. My thought was to drill threw a pice of flat stock and weld the tube threw instead of welding on the side of the angle http://tapatalk.imageshack.com/v2/15/02/16/5763b481715a1fc995c582bbba...
by mantree
Sat Feb 14, 2015 12:11 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Re: Welding round tube to flat stock

So I went and took a look all I will have to do is trim a pice of the fairing http://tapatalk.imageshack.com/v2/15/02/14/6cac0d819330000196e2e6a1ebe68b18.jpg You can only see one of the 2 frame bolts here the other one is under the plastic http://tapatalk.imageshack.com/v2/15/02/14/b7965c01b29ca55ea...
by mantree
Sat Feb 14, 2015 2:43 am
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Re: Welding round tube to flat stock

So weld the tube on with a good strong bead and then gusset it. That sounds like a fantastic idea. I will do some measuring and may have to trim a radiator support to fit it. If this was a air cooled I would just have a cross bar on the down tubes but the rad makes it a bit more difficult
by mantree
Fri Feb 13, 2015 11:56 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Re: Welding round tube to flat stock

This is replacing a frame clamp that has been just bugging me because it keeps getting loose there are 3 other mounts but this one just bugs me by always being loose.
by mantree
Fri Feb 13, 2015 8:54 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Re: Welding round tube to flat stock

Sorry I have been occupied with work I make a sketch of what I want . I have a mig a bench grinder angle grinder. I haven't picked up my materials yet I'm just in the planing stage but Honda and BMW used mild steel in there motorcycle frames with no problem for years I'm thinking quarter inch steel ...
by mantree
Wed Feb 11, 2015 5:27 pm
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Welding round tube to flat stock
Replies: 15
Views: 5196

Welding round tube to flat stock

Hello I am newer to welding about all I have done is fixed broken tools around the farm. I am now tackling my first time welding on a bike. The weld is a bracket for my sidecar because the frame clamp is slipping so what I plan on doing is welding a threaded tube on a pice of angle iron but I'm not ...