Thanks for the help guys. Dynasty, while that sounds like a fun project, and I admire your resourcefulness, I just don’t have the time to work through all that at the moment so I will be ordering the pre-made switch. Oh, and by the way, yes, my machine does have the 14 pin connector you referred to....

I have the Milwaukie Dry cut saw and it is as close to having a machine shop tool I have ever had. I gave my abrasive saw to my son. I took the time to truly “Zero In” the saw as soon as I bought it and scribed lines on the base so I know exactly where 90, 45 and 22-1/2 degrees are. Like most of the...

Hello all, I am about to weld my roll bar in my car and I would like to Tig weld it. It is a mild steel bar and I know I could Mig weld it but I think my Tig skills have improved enough to attempt it. The problem I think is going to be positioning the foot pedal which I will use where possible but t...

This is my first post so hello to all out there. I have been welding as a hobby for almost 30 years (gas, mig, stick) and recently purchased my first TIG machine. It is a Miller Syncrowave 200. I guess I am getting better at it as time goes by but I am guilty of not practicing like I should. I have ...