Apparently there no such method as dragging a mig gun

Short circuit gets better peno then spray.

Oh and that I should have the tip recessed at least half inch.

Dont be a shit kent, gafa and zip ties!!

Lest we forget

I been using a durma at work for a few months and get parts to within .1mm

I was going to say the travel speed for the one on the left was slower for reasons unknown to me.
And as I read on seems as I was on the right racks, woo yay me, this Meens im learning!!!

All I got atm.
From school one yr ago.
10mm plate, 1g, no backing.
6013 1/8

The free spin bolt idea is flawed, sorry. Think about when u bolt it down or remove. 1/4 turn on each bolt One after the other type situation occurs Also, since your frame has no cnr bracing I would suggest height adj casters to level your table out on uneven ground. And all ground it un even lol. O...

I've used the aussie version of the thermal arc welder.
On 20deg day I've ran it for 7mins non stop on 28volts aprox and wire feed to suit.
Still not hit the cut out. This is on aussie 240volt 15amp
And it was one very hot weld!!

As always, love your work

Wow, very cool indeed!!!
Don't want to buy the everlast 210ext quite as much now lol.
But think still be awesome first welder.

U got it wrong there buddy.
Ep will always put more heat to the electrode then the work piece, and this is required on mig and stick (but not always) as it is required to melt the stick or wire.

1 bar is not much pressure, it's something like 14.6psi I think

400kpa for oxygen
And 100kpa for acetaline
Then just adj your flow at the torch to suit your cut.
Clean tips well!!! A dirty tip will pop and stop alot if dirty

Ill ask the guys at work, we have both laser and plasma cutters here

Cheers ak
Would be cool to see done with out weave aswell though, just stringers.

Any chance you could do some open root mig in part9
I have not yet once had to do 1 with a backing plate.
Oh on 10-12mm plate too pls.

Ps, new job started. Forman only wants push mig. Nothing else

Nicely done!!

Good info there jody, and makes me feel better bout the same welds I did, and on the aussie branded version of your welder. I was giving myself a lot of grief with the root crowning, but since yours looks the same im now a happy camper. And funny thing is I keep a note book of your settings with tha...

Can't wait to get home to watch this, sort of maxed out my mobile data

The weldskill 200 was the first ever tig I used and didn't mind it.
Welcome to the forum

From what I have read, spray is for flat and possibly horizontal only, but that could be only for steel

Nice stuff!
Those things always seemed over priced here in oz,
Where bouts u hail from?

What dsmabe said!!!

Looks the same as my 2g

Well looks like there is hope for me yet.
Now to get a job where all my welding isn't tig

She cheated!!