A few more steps to it. http://i788.photobucket.com/albums/yy162/gurgs/P1010398.jpg http://i788.photobucket.com/albums/yy162/gurgs/P1010399.jpg http://i788.photobucket.com/albums/yy162/gurgs/P1010400.jpg http://i788.photobucket.com/albums/yy162/gurgs/P1010401.jpg and the end result before painting.s...

Just the other end,making the changes didn't do a lot,gas is at 10 Im\20cfh is at 70 amps,is that ok.
Cheers

Thanks for the comments,Len-good tip with the milk,not a huge fan of milk tho but will take the advise. I had a think about it and reckon if I run the sheet a bit closer to the edge it'll bead up better. Also I have done some oxy black wire and bronzing with beads some 30 odd years ago which helps h...

Being new to tig I fuse welded an end cap to some 4inch gal pipe for a garden thingy I'm putting together for a paying customer,which is nice ,really needed to use filler rod but was happy with the result anyways,pipe is 4.5mm thick and some sheet of steel 2mm as the cap,been self learning tig for a...

Thanks for the reply's,I do agree with the quality and allow for the future ventures,do it right do it once.As for Dynasty's I don't think we have a whole lot of access to millers/lincon's etc,support is an issue also was told here in oz.Plenty of euro tho.
Cheers and thanks again

I know this prob been covered heaps here but Iam looking at getting a new machine ,tig only,Just want to know what features to look for,like pre-post flow,HF etc without going all out,Im only a hobby welder so I don't need it all. welding mainly steels but possibly thin allu later.Was looking mainly...

Thanks for those comments

didn't see a Bundy sticker on it Mick,can't be a full blooded B&S er by the looks

Just learning to tig and have tried about a dozen or so welds on some flat & one on abit of 3/4 medium black pipe,welds are on 1/8th flat using 2.4mm electrode with er70s-2 1.16th filler except no#7 is er70s-4 which l liked better all weld at 120 amps,just after some thoughts on what L have done...

Something I whipped up.

I'm in Shepp,not to far away.
Thanks for the welcomes
Cheers

In Vic also Mick
Cheers

Gidday , sort of new to welding but not , tig anyway ,some impressive stuff on here.
Cheers.