Hello,
In an effort to understand more about what the preferred TIG Welding machines are in the market, I would like to ask you what your preferred TIG Welding machine is (Manufacturer, Model) with a brief discussion as to your reasoning. Thank you for your posts. InfoTIG

Thank you all for chiming in with your feedback on my post. John, thanks for sharing the links you provided. The Flexloc torch concept is interesting (I can see how this certainly helps with maneuverability).
The USA Weld price point was also appreciated.

Hello,

I had an interest in regards to what a good quality TIG torch costs. If you were in the market to purchase a good quality water cooled 250 Amp TIG Torch (with 25' leads), what would be the most you would be willing to pay?

Thank you in advance for your response.

Infotig

Hello Everyone, thank you for your replies to my post. It sounds like a vast majority of you set the machine slightly higher than what you need every time you change applications. So in the case of welding something like a 0.090" coupon, you may dial it back to 100 amps (e.g. from a previous se...

Hello, I work for a company in the welding industry, and had an interest as to how TIG Welders adjust their welding amperage when changing jobs. To this point, I was interested in which of the following best describes your work practice (Scenario 1 or 2): Scenario #1 : Adjust the welding amperage at...

Mike, Jim Bob, Thanks for the reply to my posting. Jim Bob, you have me curious in regards to welding on pop cans using 3/32 " Tungsten. At what amperage are you welding at when you weld this? Also, do you ever have issues with the arc popping out on you in addition to the arc wandering issues ...

Hello, I work for a company in the industry & would like to have your opinion on the following: How thin of a material (specifically Aluminum /AC Polarity) can you initiate a weld using 3/32" tungsten (Grey, Red) without distorting the material itself using the newer Inverter type of TIG te...