I was expecting someone to say spray anti-spatter all over the place....that has never worked for me [WINKING FACE]

Very nice guys ! @jdiggs how did you get the part so clean without spatter ....I see very little, very impressed with the cleanness!

It's the new single pH 230v version they are rolling out this week.. Just happen to call the factory or I would have bought a 3ph unit that was listed as single phase on Amazon. I knew I wanted digital from using the dynasty so much... It comes with 3 cheap tourches... But for what it is for what it...

Hope I don't get too much criticism for this, not trying to hyjack... I just ordered the Everlast 325ext....my dynasty 200 was taken away by a ex-business partner. I'm excited because of welding so much 1/4 aluminum with the d200 was a pain. Never would heat it all the way on bigger pieces without a...

If you ever need welding help let me know! Or wanna shoot the breeze! I tig / mig weekly

Ray what part of Indiana? I'm from around Anderson

Building this light I have a million small tabs that need cut out of 1.25x.25 flat bar. Perfect for that!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

That saw takes 7.25 circular saw blades that are cheap.... 10$ cheap. And the saw has a no hassle 3 year return warranty. I'm on my second one. As aluminum has a tendency to break the fences on chop saws when it kicks!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

http://img.tapatalk.com/d/14/05/17/8u3ytuhe.jpg Been using this for aluminum, comes with a 40 tooth blade from lowes in the usa http://img.tapatalk.com/d/14/05/17/ha2eru7y.jpg It Cuts like butter just have to take your time and be careful! For accuracy I give it a 10 with a new blade. After about 1...

I'm no engineer...was just thinking about it, a lot of what I read on hear helps me to figure out things. Like that post you made when you were welding stainless the other day that said mash the pedal, fill the rod, and go. (In the mig like tig thread) Classic! You know what they say ....pay attenti...

Somewhere between the app and putting the rats to bed I got distracted! Still haven't figured out how I did it!

It's from tapatalk, it's confusing , I apologize , but they change stuff all the time on this app. I was trying to post to Otto nobedder, about the -423 liquid nitrogen vessel he was fixing. (Post #50) It was a old post, but some how my setting got changed and it went to the oldest post instead of t...

@nickn372 I did the same thing on my kitchen exhaust, several fans in series work very well! It's all about keeping the air speed up! I used 3 fans. I had 2 and got one more , liked it so we'll I kept it that way.

Very informative! Didn't realize the lanthanated out preformed the others....I stand corrected! Thanks!

Found the hose/cable separate for 65$ not a terrible loss, but a avoidable one none the less.

Is the vessel subject to shrinkage with the extreme temperature differences ....seems to me that much temperature difference from the ambient temperature, even a small leak could cause a hot spot, and build on itself till it ruptured?

Just thinking.

I never hear anyone talk about Ceriated tungsten ? Is there a downside? It's what came with my dynasty 200 runner and it rocks on aluminum! Don't split like thoriated when the amps get to high. Use it on steel or whatever. I tend to run on the hotter side, do a lot of 1/4 aluminum

Sorry just saw the other thread! Oops

I forgot to turn on the cooler on my dynasty 200... While running a couple welds on some thicker aluminum 3/8, Apparently it makes a lot of smoke/steam when the water cooled line overheats, and ruptures! Don't know why they don't make it plug into the back of the TIG so it comes on at the same time!...

I'm sure you have already done this, but are you using a ton of amps at startup? I welded a bunch of ground clamps together, (like 30 )that were 3/16 . On full power for my dynasty 200, the whole time! I was using 30% helium. Once it would puddle! it ran like butter!

Thats what i fiured... Just really trying to keep learning and growing with my aluminum work.

I have considered building a boat next.

Sent from my SAMSUNG-SGH-I337 using Tapatalk

These parts go on here... http://img.tapatalk.com/d/14/02/18/va3ypesu.jpg I built the bimini frame... Brackets, and did all the sewing on the sunbrella fabric too. http://img.tapatalk.com/d/14/02/18/qy5aveze.jpg This was before the fabric was streched tight. Sent from my SAMSUNG-SGH-I337 using Tapat...

Im not a pro or a Everyday welder... Just do it for fun when i have a idea or a project... .. Never had formal training. Learned everything I know from welding tips and tricks!!!

Sent from my SAMSUNG-SGH-I337 using Tapatalk

http://img.tapatalk.com/d/14/02/18/enujasaj.jpg http://img.tapatalk.com/d/14/02/18/nupesypa.jpg This was something im working on... Originally I did it with the MIG. Decided to "clean up" the look of my welds.... Went over them with the tig and reheated them. This first one is the weld in...

My question is can you overheat a aluminum weld? Some tig welds look like they barely melt it in.... Mine are hotter... Ive always welded on the hot side? http://img.tapatalk.com/d/14/02/18/ezumevur.jpg How does this effect the strength? And what if you Re-Heat them? Sent from my SAMSUNG-SGH-I337 us...