cj737 wrote: ↑Wed Jan 03, 2024 9:01 am I don’t see how having a single larger bottle will solve your setup problems. Can you be more specific about what the actual problem is?

Just to get rid of an extra cylinder. Would this be a fair trade or a loss?

I have two argon cylinders, an 80 and a 20. I exchange them for refills every so often. The smaller is my back up but when I switch them over, the setup malfunctions and it leaks.

Question: would you trade these two cylinders for the next larger size, a #4 (125) if they are willing?

I realise it doesn't help you much but I am curious how that is an upgrade. I would go to the ball type rather than from it. Is what you have of poor quality - or broken - that you want to change? Tweak , Jack The gauge said 400-500 psi forever and then my Aluminum welds started blackening like I d...

Hi,
I am interested in replacing/upgrading my regulator.
Doesn't have to have the flow meter floating ball sightglass. This is what I have now. I kind fancy this Victor gauge.

Any ideas?

cj737 wrote: ↑Mon Jan 01, 2024 10:28 am The #5 can also use a wedge collet, but that does not look like a Furick cup. Similar, but not the same.

It seems like every ad I have seen says the #5 for the 9torch uses the wedge, and slit for the 17–even on the furick site.

This set right.

WTAT is out of ally#5 pyrex cup for 17 torch, so I had to order from amazon. This is what I received, twice. It appears to be an ally#5 for a #9 torch. The white insulator will not fit on my CK17 and it comes with a wedge collet which i think only ships with the ally for the 9 torch. Can someone ple...

Thanks to everyone! I am dealing with issues with my setup and just ruling out issues that could contribute to the big picture. I am liking ally welding and keep it under 150amps more like 125-140 3/32”… on 1/8” material. My torch starts to get hot but Seems like I am not really welding dozens of be...

I have a ck17 flex head. I have been practicing on aluminum but it seems like i can perhaps run 10 four inch beads on coupons, maybe less, and my torch feel hot .

Normal? Abby-normal?

Can I move the inlet and adjustment assembly so the bottle is on the other side?

It looks like a cheap generic co2/ar meter you see everywhere. pinchy flow valve seems crude. dual for purge cavity right. i bought a plastic flow with the black base and clear tube to measure flow and though it is in l/m it was less than what the cfm reading said. the inlet on most come out of the ...

Anyone?

Hi,
I have had my machine for about 2 yrs and I have the co2/ar meter that came with it.

For those of you that have the same machine, can you rate this flow meter?

How accurate is this meter and if you were to upgrade what would you get?

Thanks to everyone for the helpful tips. i wasn’t looking for a welding lesson just trying to get an answer as in the OP from someone who also owns this machine. happy new year. unsubscribed … cheers

You want to be between 25-35%. thank you for responding. I am looking for a different answer. I know what you wanted someone to tell you, but providing you the range of the cleaning action SHOULD answer your question if you think about it. There’s little value in knowing only what you have been tau...

(EP)-ELECTRODE POSITIVE A/C Balance knob for AHP-201

Thanks yall.

cj737 wrote: ↑Tue Dec 28, 2021 3:48 pm You want to be between 25-35%.

thank you for responding. I am looking for a different answer.

Hi, I am looking for any fellow owners of this tig box who can shed some light on its operation. I was looking at the woefully written user manual for this TIG machine and I cannot tell if the AC balance adds NEGATIVE or adds cleaning when the knob is turned. The literature is not clear to me and I ...

Heard back from Jody’s crew.

There was a small mixup at the warehouse and inventory description which resulted in the wrong parts being sent for a 17 torch. No worries. he correct parts for my stubby kit are being sent POST HASTE.

I just got my wedge collets order in the mail and houston, we have a problem-they dont fit.
The old 3/32” collet and the new smaller 3/32” wedge collet.
Any ideas? Thank you.

Also not sure if you have a collet wrench or not but they definitely help slot. Got mine from arc zone and I have no more issues with a loose gas lense as I did before. (Used to pull the lense out with the shield cup when trying to only remove shield cup) Used to have a tough time getting my split ...

I have been using the same setup just fine, but more and more it is harder and harder to get a tight fit. I switch out the collect and helped a lottle. Thank for all your responses!

I ordered 1/16 and 3/32 stubby wedge collets for my torch, long over due.

Perhaps the lense itself is just worn out? Or are the threads on the torch head itself wearing out? Did it start out as difficult to tighten down the tungsten or was it good at the start? I'd personally try another lense and see what I get. Sent from my Pixel 3a using Tapatalk I switched to 1/16 an...

I use wedge collets and don’t have any issues. Is it a CK lens? I don’t use those, but many, many people do with great success and reviews on them. wedge collet, of course. When i bought the stubby kit no one had the stubby wedge collets, then i forgot about it. Craptacular. I am sure this is what ...

I use wedge collets and don’t have any issues. Is it a CK lens? I don’t use those, but many, many people do with great success and reviews on them. When i bought the stubby kit no one had the stubby wedge collets, then i forgot about it. Craptacular. I am sure this is what is occurring . I onlyhave...