I learned bretty much welding whit Tig machine like that. When you learn it you can adjust most of the other brands too. Dont remember where to adjust balance or frequrence but i recall that there was settings that you need push Amp button to get more settings to adjust? but it on ac. and when that ...

Thanks Thanks,they dont only look good they are good 8-) Nope no xrays yet drawings said that xrays must be taken on (is it called) out of position welds... But who the he..l knows what weld is made on where if i say so..(nothing aqainst NDT long as they dont bust my ass) just dont like them and tha...

Hi so i found the technique to do it whit out gap/bewel only mismatch what comes cutting whit them on a grinder and litle smoothening thoos pipe edges on flabdisc. This ones what can be weld that bench i weld them on 10-12.clok and it worked on me 75-80Amps and dipping wire every time when that budl...

THANKS EVERYONE "BUUSTING UP" My confidence ;) I get two very shit photos my cameralins is so worse. I was told to do 3mm thick at one pass no gap.. there will be only 3mm no 4mm thick pipes.. I made some bewel and weld couople of them about 80A And realy REALY slow And let that pudle vapo...

I will for sure.. yeap litle nerves now its 10.00 at night in Finland,couple hours sleep and drive to motel and then work at there. I like this kind of stuff but im a litle too nervouse about my self Okey thanks for thoots and i will tell you later how it started...

Okey that gap is one choice. But but when you think that pipe is 400mm and 300mm radius and total about 63 or more joints making it one pass would be huge time saiver its about range 1.4m weld by joint and 2.8m in two passes x63... What would you think about this, knife edge 60-70° bewel no gap or o...

Im familiar whit the procses Tig SS but thinner like 1.5mm-2,5mm And that 3.00mm 1/8 thicnes is a new thing im not sure how to do it meaning should i use gap? I just came out of my carrage and i beweled 3mm thick plate allmost knife edge and tacked the plates (no gap) 1.6mm filler and tried differen...

how you weld 1/8 (3.0mm) or 4.0mm thick ss pipe. im gona be welding proses piping 400mm x 3.0mm to 4.0mm thick. And i think i will bewel them litle but no gap. so i can get easier trough it whit out that gap and but it on one pass at least that 1/8 thick. There gona be some xrays taken of them 10% l...

By the looks of the texture and the sharp details I would assume it is a gravity die cast (kokill, if you know the Swedish word for it ;) ) A very common Aluminum quality for that method is AlSi10Mg which is recomended to weld with 4043 as far as I can find. Thanks for info. Yes some other parts re...

There is gap between to parts welded. Service time i ment that contamination shortens that weld lasting eaven longer. That cast has somekind of coating? The pic doesent show thoos (peppers) and if that coatin could not grind it shows much better.

We weld this kind flanges bretty often. This pic is one part todays jobs making tube connection that hole will be grind smooth. But my queston is what is that shiny stuff on that cast i grind it wire wheel and some flab disk but still in the puddle flows all kind black spots of it. Welds are pressur...

Today I was welding a 60 mm 1.6 thick stainless pipe which I don't have much experience with the fitting was a bit misshaped so the alignment wasn't great however I got my root through fusing both edges but once I capped the pipe it looked like I had some secondary penetration was wondering why thi...

Here some Stainless mig welds. Looking my old welds (iphone) and same kind joint and its great to see the difference. And i try write some of the settings down to later use. New Pulse/Syn machines has so much extra adjusts to arc chartericks for different situations.

That Minnesotadave tip is good. Making straight lines at the plate so deep you can see them good in helmet down. Allso try old style basic helmet different shades, I havent found Autodarkening helmet whic shows buddel near as good then like 10-11 shade old helmet. Here a pic i practised to keep my ...

dle

weldin mike 27 wrote:In English they are called "liquid load splashy stoppers" lol joking. In Australia, they are called baffles.

Whit my GOOD Eng i would been writed it something like you mentionet

Excellent work, Aleksi! You appear to be rebuilding the front jacket, at the 5th wheel plate, and the front head is next? What service is the trailer? (LIN, LOX, LAR, CO2? LHY?) Steve S Its a Jet-fuel trailer. Yep front head is next, but first i weld one (dont know what is it called Eng) that whic ...

Here some pics at todays work. Mig welded inside/outside by Fronius mig pulse.. I was so sceptic could i do this welding (normaly these can be rolled) no it was that 5g and about 6.80m weld both side but it went bretty decend and passed the tests 8-) I love do this challengin welds but then when you...

Hmm i need to have one :D I usually dont use it if the grinding place is abowe my head or uncomfortable, because when it bites too deep you need good grip to your grinder.. I Mig AL bretty often butt joints weld both sides and porosity comes so easily on Mig AL and welds mostly x-rays so gettin laye...

I had never seen one before. My curent job is welding new and repairing old oil/chemical containers. And often time old craks are full of all kind of contamination. And there this blade is useful because it leaves that AL surface so shiny so i can spot every litle hole/porosity. But you are right ab...

I wanted to share this thoos who weld Aluminum and having porosity on previous welds or a grinding dust on flapwheels is cousing gray hears on X-ray test. I dont know is thees blades used any where else???

If you are welding at your job too why dont take some thicker scarp plate and start adjusting there. then you can keep you arc on and tweek it there and not worry burn trought. So get better practise material and not that rusty tube. Every that size machine will short sircuit for sure

I think it was very good video. Because jody showed that lack of fusion at beginning on aluminium weld. I have done the same mistake when you feed that rod too soon. Many can weld some kind of weld on AL, but making sound long lasting weld not to crak in years in use is bit harder. Im no expert on A...

NOPE Never have been.. Ihave all the welding i need here in FINLAND (about 200-250m AL/SS per/trailer few pics of ss pipe welds. Look that topic and you get to see litle what i weld every day.

looks like you have find your style to weld it. Looks great to me compared to first pics.I like that Tig, did you freehand or walk the cup?