Will try later with 0.4 O 0,4 A

On that 0.7 A 4 O setings...I always manage to get Neutral flame...

@Otto...well thats strange....6 PSI...google says its 0.41 BAR :) ANd its realy strange for me. Today I will be welding probably so i will try that 0.4 BAR settings on both oxygen and acetylene. Im Running curently on 0.7 BAR Acetylene and 4 bar Oxygene. 10 PSI A 58PSI O. @Poland...one day il make m...

Greatings friends. Im an old forum member who had no time for ages to come and hang out here with welding folks. So...here I am. At full shame and glory united again :D Here is a little video for you all: https://www.youtube.com/watch?v=97BoZGLOXLc&feature=youtu.be Will post more soon... P.S. So...

Bill thanks for such detailed description. The problem is m english is realy bad...especialy in technic vocabulary, and google translate does not helps much, so I understood very little from your post. If it is not a problem to you just make some scheme in ms paint and than you just save that on des...

Man...I simply feel so bad for not beeing able in 2 page topic to explain what do I need. Good damn running away from english classes. So ms paint will be my tool :) Here is a picture HOW THAT CONNECTION IS DONE on fabric trailor: http://s11.postimg.org/9p6coar3z/Untitled.jpg The main prooblem with ...

Yes they can drive tons :) They look smal buth that pto unit gives it ability to carry annything and annywhere. Mine is 1986 year built and all those years we only change gear and engine oil and put some diesel inside. Its lombardini 450ccm engine 4 stroke diesel. Newa had a single falliure, and its...

Noddy...yes finaly someone understood my bad english :D Its simple thing "how to connect trailor and tractor thing" that I can not solve. On the other hand connection with rear axle so rear wheel also have power that is no problem for this tractor it uses 2 of those universal joints(one ne...

Again we mistunderstood ourselfs :) Welll...the thing is...that trailor is attached to the tractor so it can turn left right up and down. under that connection there is a shaft that transfers power from tractor to trailor wheels. and that shaft has those universal joints. BUth I am not asking on tha...

Cant use that joint type because it moves in wrong directions. It would allow tractor to steer left and right but also when loaded trailor would push that joint down and then tractor and trailor would not be in a straight line...under that joint is an axle that goes from tractor to the differential(...

Well topic is abouth a small 2 wheels tractor and its 2 wheel trailor Such one I have and its trailor must be rebuild from new. Althought small and abouth 13hp tractor those little things can carry really much weight(good gear ratio) and they are ideal foor woods and bad roads. They can go annywhere...

well then I am going waaay to fast I make 15 to 30 cm per one rod

Problem is when i do go slower...pudlle tryes to come in front of the rood and then I have slag inclusion and I weld with rood angle ofcourse...maybe 15 to 30 degrees

Man thats imposible for me to doo it. when I weld I make 15 to 30 cm or 6 do 12 inches max
i am waay to slow to make 100cm or 40 inches with one rood

Welded all day long...tryed my new toy :D Wee putt waaaaay too much weight in my smal tractor trailer(as usual) and sudenly on those bumpy roads trailer felt apart :lol: man it was funny to look at that disolvation dissaster :lol: :lol: :lol: :lol: bought feew u profiles on scrapyard and wellded the...

I think its inverter machine...it volume is like an old pc housing.
and has a lot of buttons and setings...I never could eaven turn it on

Never figured it why buth english always looked like some striped and choped and peeled language to me. Soo simple buth so empty to say the poent. One english word can be translated to 10 serbian...and sometimes 10 english cant describe one serbian. I assume its not english languages fault buth thos...

hehe than it is more funny than i tought...

i tought that you did not understood me cause i have bad explained buth actualy I did not understood that you understood me

@Steve you did not understood me...its not me in the question. damn english lessons, never liked them :) i do not weld tig and dont have that type welder. I only have ac buz box. My friend has that tig welder and he asked me to buy him those needle when I was in our state capital...and the problem w...

Well hello to all...did not posted a while on forum...been on som damn road trips... And got some dangerous questions :) For short version: Can anyone please explain me what does that collor on the tip of mig needle means? I do not know whats the name of that object...its maybe 10 15cm long and has ...

Man thats waaay to moch for a tesla coil thing. The welder I am using telwin made in italia was abouth 80 buck that means I could buy 4 welders of that kind for one that tesla coil pig...and its an nice welder...goes from 55 to 160 amps, has fan that works all the time... Maybe people should just pr...

How much that pig costs?

Not realy shore what exactly part are you all talking about...buth just to say my friend who works ats small tractor trailer factory welds axles and all other trailor body and gearing parts constantly. We call that diferential...its the part on wich you atach rear wheels...hee welds them constantly ...

Well, I have just come back from my buisnes trip, with my rusty all carr. Man we traveled lot of miles in few days

Will answer you soon on your message. Buth first must eat, will die from hunger

Once I wrecked all stores in my town looking for those 6011 rods...because somebody said to me they penetrate more...buth could not wind them. Here in bosnia in most stores you can buy croatian zagreb electrodes and slovenian jadran electrodes. and both are 6013. maybe in some bigger stores there is...

Well...as a fella named Eric Cartman once said: "God dam hipys" this was a verry hard day. Yesterday I was working 3rh shift from 18h yesterday unthil 7h in the morning today. Gone home and slept till 9h. And than started working on my old rusty car. Few day ago a finished front parth of t...

First few tackle welds are most bad ass eyes burning asholes :shock: When I must put peace of sheet metal on hole and there is no way to hold it with anny tools then I put mask aside. Rod in one hand, shet metal holding in other hand and than must place few tackle welds to position the metal. Oooooo...