This technology provides a smooth, spatter-free start. The best starting machine in the small MIG category! No pop-gun starts or spatter to clean up. Still I have no problem with this so I can't find the problem with your set.

I am agree with Otto Nobedder.

Hey, this was very informative to me.

I appreciate all of the info that you guys have provided me. I'm just starting out so (you're right) I haven't taken many test (only 40 or so all being hodgpog of root/face bends, side bends, macroetch, dye pen, and x-ray) SO FAR! I'll be taking some certification tests and some UA test soon so that...

I have also suffered from this problem. Thanks for this post. I have also get some solutions from here.

You can search on Google. There you can find many users of it. Good luck.

I have same problem as weldin mike 27 have.

Came across this post by chance and must admit I liked it...

I have same thought as Otto Nobedder.

Thanks for sharing.

I am agree with karir.

Porosity in welding is a result of dissolved gases or gases released during the welding process, being trapped in the metal when there is insufficient time to escape prior to solidification.

A bead is a small, decorative object that is usually pierced for threading or stringing.

A filler metal is a metal added in the making of a joint through welding, brazing, or soldering.

Aluminum bronzes are most valued for their higher strength and corrosion resistance as compared to other bronze alloys. So this is good one.

Thanks for this informative forum. I like Otto Nobedder suggestion. This is also much informative.

Determine if your tool needs sharpening. Find a professional sharpening service. If you are interested in learning how to sharpen blades yourself, it is recommended that you locate a teacher. Carbide tools require diamond for sharpening, due to their hardness.

Satin coat steel is a very light galvanized coating. I don't know how they do it, but I doubt it is dipped. It is probably sprayed on hot.

Mostly green tungsten is preferred.

In chemistry and chemical engineering, a separation process, or simply a separation, is any mass transfer process used to convert a mixture of substances into two or more distinct product mixtures, at least one of which is enriched in one or more of the mixture's constituents. In some cases, a separ...

Whole set of stainless of stainless steel cistern can produce the stainless cistern which is the 520-3200mm of diameter, and 0.3-12mm of thickness. Microprocessor control and multi-tap arrangement in transformers allows selecting precise parameters for welding various parts.

I am agree with Otto Nobedder. I think also same.

By using lenses in your welding helmet, you can see.

Aluminum is the most difficult alloy to weld. Aluminum oxide should be cleaned from the surface prior to welding. Aluminum comes in heat treatable and no heat treatable alloys.

WM63B-3plastic pipe welding machine, 1200mm Butt-fusion HDPE Plastic pipe welding machine are some good pipe welding machines.