thanks for the replies everyone
seems to be one pass with filler is the best way to go
found this articale today which was a good read,
this is part 5 which relate to the welding only but you can find the other at the top of the page
http://www.burnsstainless.com/weldingarticle5.aspx
Search found 36 matches
- by mr 32
- Thu May 12, 2011 11:47 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: stainless steel exhaust
- Replies: 5
- Views: 1458
- by mr 32
- Wed May 11, 2011 11:01 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: stainless steel exhaust
- Replies: 5
- Views: 1458
stainless steel exhaust
hey guys
im keen to have a go at doing a stainless steel exhaust
the thing that is confussing as ive looked around some people just fuse the joints, others fuse and then go over with filler after its cooled down
and some do it one pass with filler.
whats the best way to do it?
thanks
im keen to have a go at doing a stainless steel exhaust
the thing that is confussing as ive looked around some people just fuse the joints, others fuse and then go over with filler after its cooled down
and some do it one pass with filler.
whats the best way to do it?
thanks
- by mr 32
- Wed Mar 16, 2011 9:48 pm
- Forum: Metal Cutting
- Topic: Multipurpose Cut off saw (TCT Blade)
- Replies: 32
- Views: 10850
Re: Multipurpose Cut off saw (TCT Blade)
Interesting :) The cold saw I was lookin at was about 800 bucks, and this thing is about half the price. Looks like I'll have to do some research. what was the other saw you where looking at? im trying to find more info on these aswell, im intrested know how square they cut stainless pipe best i co...
- by mr 32
- Wed Mar 16, 2011 7:20 pm
- Forum: Metal Cutting
- Topic: Multipurpose Cut off saw (TCT Blade)
- Replies: 32
- Views: 10850
Re: Multipurpose Cut off saw (TCT Blade)
is that the same blade the sparky's use to cut their conduit? I was lookin at buyin somethin like that but am lookin at a cold saw instead. i dont think so, could be wrong these use a tungsten carbide-tipped blade come in 70-and 90 tooth i assume for mild and stainless applications im told these ar...
- by mr 32
- Wed Mar 16, 2011 6:01 pm
- Forum: Metal Cutting
- Topic: Multipurpose Cut off saw (TCT Blade)
- Replies: 32
- Views: 10850
Re: Multipurpose Cut off saw (TCT Blade)
thanks for the reply
have you used them with stainless pipe?
have you used them with stainless pipe?
- by mr 32
- Tue Mar 15, 2011 10:42 pm
- Forum: Metal Cutting
- Topic: Multipurpose Cut off saw (TCT Blade)
- Replies: 32
- Views: 10850
Multipurpose Cut off saw (TCT Blade)
anyone used these new style multipurpose cut off saws?
been looking at the dewalt one and looks good
just want to know how well they go with cutting true
been looking at the dewalt one and looks good
just want to know how well they go with cutting true
- by mr 32
- Thu Mar 10, 2011 10:27 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Stainless Steel weld grey
- Replies: 10
- Views: 3770
Re: Stainless Steel weld grey
thanks steve
ive got a few more pipes to practice on, hopefully get a constitant straw colour after a few
i think the HAZ to the laft was from the veiwing angle, i might try bing up a bit higher when i weld,
i was welding the way i was loking in the first picture if that makes sense
ive got a few more pipes to practice on, hopefully get a constitant straw colour after a few
i think the HAZ to the laft was from the veiwing angle, i might try bing up a bit higher when i weld,
i was welding the way i was loking in the first picture if that makes sense
- by mr 32
- Thu Mar 10, 2011 7:01 am
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Stainless Steel weld grey
- Replies: 10
- Views: 3770
Re: Stainless Steel weld grey
finally got a chance to give it another go this afternoon.
using a gas lense up with a number 8 cup with 13-14 l
let me know what you think (sorry about the phone picutres)
using a gas lense up with a number 8 cup with 13-14 l
let me know what you think (sorry about the phone picutres)
- by mr 32
- Wed Feb 23, 2011 8:39 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Stainless Steel weld grey
- Replies: 10
- Views: 3770
Re: Stainless Steel weld grey
Sorry I'm real bad with metric conversions. 3mm is damn near 1/8 ", I thought it was alot less than that(like 16 guage). If your runnin about 3/4 pedal off 100 amps thats 75 amps, and that should be ballpark where you want to be heat wise. If your not running a gas lense setup, the way I was t...
- by mr 32
- Wed Feb 23, 2011 5:44 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Stainless Steel weld grey
- Replies: 10
- Views: 3770
Re: Stainless Steel weld grey
What are your amps set at and whats the alloy of the pipe? When your doin stainless the rod will tend to get stuck in the puddle, but you cant have to much amperage cause youll just burn up the pipe(which it sounds like is happenin to you). You gotta be quick with your rod and just feed it in more,...
- by mr 32
- Tue Feb 22, 2011 11:32 pm
- Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- Topic: Stainless Steel weld grey
- Replies: 10
- Views: 3770
Stainless Steel weld grey
Hi Everyone still new to tig welding but know why around. need some help with welding stainless steel. im practicing on some 3mm pipe about 60mm in dia I am back purging the pipe so im not getting any black on the inside. but on my hot side my welds are really grey. my weld puddle would be about 3-4...
Jump to
- Introductions & How to Use the Forum
- ↳ Welcome!
- ↳ Member Introductions
- ↳ How to Use the Forum
- ↳ Moderator Applications
- Welding Discussion
- ↳ Metal Cutting
- ↳ Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
- ↳ Mig and Flux Core - gas metal arc welding & flux cored arc welding
- ↳ Stick Welding/Arc Welding - Shielded Metal Arc Welding
- ↳ Welding Forum General Shop Talk
- ↳ Welding Certification - Stick/Arc Welding, Tig Welding, Mig Welding Certification tests - Welding Tests of all kinds
- ↳ Welding Projects - Welding project Ideas - Welding project plans
- ↳ Product Reviews
- ↳ Fuel Gas Heating
- Welding Tips & Tricks
- ↳ Video Discussion
- ↳ Wish List
- Announcements & Feedback
- ↳ Forum News
- ↳ Suggestions, Feedback and Support
- Welding Marketplace
- ↳ Welding Jobs - Industrial Welding Jobs - Pipe Welding Jobs - Tig Welding Jobs
- ↳ Classifieds - Buy, Sell, Trade Used Welding Equipment
- Welding Resources
- ↳ Tradeshows, Seminars and Events
- ↳ The Welding Library
- ↳ Education Opportunities