Your Airco Radiagraph does not take 3 hoses. The machine torch currently held in your Radiagraph takes 3 hoses. 3 hose machine torches are often used when cutting thicker steel. Usually they are used with 2 oxygen tanks and a fuel gas tank. Each tank has a regulator and a hose. One oxygen hose is us...

Bassick is the industry leader in floor locks. They are generally sized by the caster wheel size. If you have 4" wheels buy a 4" floor lock. But floor locks do not lift the table off the floor. If you need feet that lift the table off the floor then you need a different design than floor l...

I can usually hold it "pretty close" and get 1 small tack on it, then adjust from there. It's pretty easy to bend one small MIG tack.

Don't trade them for a 125. Lots of those are leased or rentals. Trade for a 150, because those are all customer-owned so you know you're safe. Plus, a 150 is almost exactly the same cost to fill as a 125 and you get 20% more gas.

I have a dc-2400 victor pantograph i use a fair amount the magnetic tracer is getting weak, could you give me more detail on making a new tracer as you described ? I think the Victor machines are descendants of the old Heath machines. I had one of those and my magnetic stylus kept coming off the te...

Ever notice that abrasive chop saw blades come in different thicknesses? Why do you suppose that is? I had all kinds of trouble with blades deflecting until I realized it was on those kind of cuts I was supposed to be using thick blades that won't deflect as easily. For me it was angled cuts where t...