thanks for the right suggestions, the frame that should be fixed to the machine wouldn't it be ideal to make it in profiled perhaps shaped? thanks

https://www.raexsteel.com/en/abrasion-resistant-steel

blade dozer.png scraper blade to be applied to mini tracked transporter Hi, a friend of mine would like me to make him a small bulldozer to attach to the front of his small tracked transporter to use both to move snow on the driveway and to level and spread gravel on his garden path. What material ...

could you kindly attach photos, thank you, the idea was to bring up some metal boxes, anchor them to the attic, create a closed perimeter frame with beams and screw corrugated sheets to them, no hut or shed, making a structure means employing workers, engineers, surveyors and a crane, only the crane...

https://www.iforgeiron.com/uploads/monthly_2024_02/image.png.08d8a1590cb34ccf132794d6f202873a.png https://www.iforgeiron.com/uploads/monthly_2024_02/image.png.2fbdf08920a68eaae92540a441b02b01.png https://www.iforgeiron.com/uploads/monthly_2024_02/image.png.e58e8226876ed1e0443c6fbe47f7a8f0.png https...

metal load-bearing frame for terrace roofing :?: Hi, for an old house of mine where when it rains water gets inside I would like to create a metal structure to place on the terrace, give it a slope and put corrugated metal sheets on it, can you help me, 10 meters long, approximately 14 meters wide, ...

design aid hand tool for digging holes in the ground countryside: hello, I would like to make a tool at 0 cost with waste materials to make holes in the ground to bury wooden poles and plant plants some feasible ideas by spending a few money thanks :?: [https://youtu.be/pr0o2NWx93g][/youtube] https:...

thanks for the valuable suggestions

I found out if the device is equipped with an electric hoist with a capacity exceeding 350 kg it must be certified and accompanied by a project by a professional such as an engineer
https://youtu.be/_yOjsk4TUUo

https://youtu.be/aJDDgnj5k8k

https://youtu.be/Y1PfDxgREHA

if you use an electric hoist it must be certified if it is manual and you use it it depends, I have no employees it is a structure that I will have to use, how do you advise me to conceive and build it economically? it must be light and handy to use and clearly robust to support high loads, thank yo...

https://bladesmithsforum.com/uploads/monthly_2022_04/353450446_gantrycrane.thumb.png.c268ca7333f551b40a647703c3b8b61f.png https://www.materialshandling.com.au/wp-content/uploads/Mobile-gantry-crane-4-800x738.jpg :?: :?: Width: 3.6 meters • Height: 3.2 meters Dimensions: reach 3.6 m, height 3.2 Weig...

hello, I'm just setting up my welding workshop, I don't have cranes or forklifts, but for the heaviest jobs I would need a frame to hook up a chain hoist to set up a sturdy and effective temporary crane, modest capacity around two tons, with a useful height between 3 and 4 meters of useful height an...

hi, my name is nestore, I'm a new user and I'm Italian, thanks for having me among you, I hope to learn a lot from your advice and teachings, thanks, greetings.