Sure a strange coincidence. I would only get a high frequency arc. After hearing feedback in my hearing AIDS I shut them off and the welder worked like it should. Sure glad it did not hurt my hearing AIDS. $5200 Investment. The guy I was welding for has a pacemaker. I made him stay away from me whil...

Went to weld a fuel tank aluminum. Could not get the welder to ground. Even on the ground clamp. Was getting feedback in my hearing aids. Shut them off and put them in my toolbox. My hearing AIDS have Wi-Fi in them. After shutting them off, welder work just fine. CK welder MT 200. Has anybody ever h...

Come on somebody need this. Make me an offer.

Just remembered something 40 years ago I welded the mainspring in my brother's 1 ton dump truck, never broke again. Used eutectic 680

Just remembered something 40 years ago I welded the mainspring in my brother's 1 ton dump truck, never broke again. Used eutectic 680

EutecTrode Xuper 680 CGS Applications Jigs, Molds , Dies , Leaf springs, High strength repairs to earthmoving, mining, constructional equipment, Chassis and under carriage repairs , Manganese steel components. This is a higher grade eutectic rod the straight 680 would do the job in my estimation but...

A rod that would give you a superior weld is the eutectic 680 and that can be purchase from Praxair. It has a hundred and twenty thousand PSI tensile strength and is used on all tools Steel to join them together used extensively for a butter well under heat treatable passes over it. Remember if you'...

A rod that would give you a superior weld is the eutectic 680 and that can be purchase from Praxair. It has a hundred and twenty thousand PSI tensile strength and is used on all tools Steel to join them together used extensively for a butter well under heat treatable passes over it. Remember if you'...

A pre heat of 800 Fahrenheit plus or minus 50 degrees for the Post heat of 900 Degrees this should be held 1 hour per inch thickness. Depending on type of welding you're going to be doing if you want your weld to show or not meaning difference in coloration to the base metal or if you want to weld h...

1095 steel is a high carbon, simple steel. Chemically, the steel contains just carbon, .90 to 1.04 percent, manganese, .30 to .50 percent, phosphorus, .020 percent maximum, sulfur, .025 max, and silicon, .15 to .30 percent

What method of welding are you going to use Mig TIG or stick

This is a water cooled again manufacturer has return line plugged golf for some reason.

This is most definitely a water cooler again but for some reason the manufacturer has the return line plugged off. A new return water line with left hand thread would have to be added.

Tomorrow I will put some low air pressure to it and see what I find out on flow through the gun

I'm not sure one line blocked off right at the gun. So I would say air-cooled but it looks like you could add the return line. Never tried to hook it up to anything.

Have a new older Cobra Mig gun never used. Just been laying around time to get rid of it. $1,000

I got in a project this past year with a friend on his rat rod.

Looking to see what I can learn.

New to The Forum. It's awful that your Workshop has to share with your cars. From Missouri.

1620430794784528097619.jpg Over the years I've used several different helmets and just recently A friend gave me a helmet while we was doing a project for him making silhouette targets. It's a Vulcan helmet sold buy Harbor Freight but he said he bought it online cheaper. This helmet is very easy to...