Many Many thanks Hunter. Both side tack weld, 3cm long. TiG welding. Will clean well and brush off the oxides. Lol... I do not intend to do Destructive testing ;) The last part of the message was quite informative. Many thanks. Many Many thanks. Length of weld: Depends if you are welding on both sid...

Looks like a canister for a cryo tank or some type of wash canister. Thank you for your reply BillE. It as a lifting equipment. Vertical bars are rested on base plate, which in turn will be kept inside a cylindrical container. The vertical cylinder with blade is just to compartmentalize the rods. H...

3 or 4 stitch welds up each side, each one being about 2 inches long. Thanks Spartan. Below is how, vertical rods will be compartmentalize between central cylindrical part and 4 blades/plates as shown. These will be put inside a drum, that will be lifting entire assembly. So loading wise, only tilt...

Spartan wrote:Depends on intended application and stress loads
.

Many thanks for your reply. Application is just to compartmentalize vertical rods. There will not be significant loading on the parts. It is sort of shelf. Does that explain intended application?

Dear Fellows, I have a Aluminum Cylinder 390mm OD and 400mm Length. Thickness of cylinder is 3mm. 3mm Aluminum Plate worth same height 400mm will be welded to the cylinder. Keeping the Aluminum plate as much straight as possible is required. Al Weld Details.PNG May you please let me know what should...