Hello, Can anyone fill me in....... on the setting of A/C Balance on an Everlast 255ext? I have been very busy with work and a few weeks holidays, where I haven't touched The Everlast machine for almost 4 months. I've never had to rely on welding for a living but would pick up a torch, primarily sti...

Hello Steve I hope you don't mind me sending all these photos I wanted to try out the stick function I think Paul's on the stick is absolutely crazy never seen it before anyhow I'm a little bit confused because if you see the photos hopefully the whole photo came through but the one photo shows a dr...

The instructions state to use ethylene glycol in the Tig cooler, I just picked up a gallon of Prestone. Any thoughts?
Thank you.....

Sorry again for the typos...... as I mentioned earlier, I often use voice dictation, including when I'm driving and then tap send!
I will stop doing the voice text

Hello, Absolutely no issues, I actually thought it was very nice to voice your concern...... thank you I wonder what happened with that orange county choppers I heard that they went belly up ! I always got a kick out of the way that they would tig barehanded in short sleeves I don't know how they ne...

Hello, No I am not attempting to use Lincoln Pedal on everlast... I was moving the Lincoln over and disconnected pedal and leads, when I started unthreading pedal connection to machine, the wrong nut rotated causing the wires to twist and some to break.... I had to pull apart connector and resolder ...

The Everlast and cooler are much heavier and will be much more difficult to move around so I will keep the 200 where I can just toss that and the small Argonne bottle into the truck when I need to do some small repairs or make up a bracket on site or something along those lines. The Lincoln is actua...

IMG_1298.JPG IMG_1297.JPG If we start talking about domestic product and quality I mentioned in an earlier post that I picked up a Lincoln square wave 200 back in August 2016..... well I started making room for the new Everlast and decided that I would disassemble The Lincoln square wave and starte...

I do voice dictation with my phone and unfortunately it doesn't always come out properly sorry about the typos

IMG_1296.JPG Yes I'm about 25 minutes from Burlington, Brewington is a small town of about 250,000 people just west of Toronto which is about 5 1/2 million now . I called Everlast in Burlington at 1 PM today which is Friday and received a message stating that they're open full days Monday to Thursd...

Hello, I realize your thread is a year old but would like to know what you ended up doing... (purchasing) I purchased the Lincoln which is a pretty good machine but adjustments are limited such as adjusting pre-post flow which makes this tigster an argon pig. As mentioned the square wave is a solid ...

Hello All, I'm in the market for a new tig machine...,. I am also in Toronto, the land of everything you buy is three times the price of items in the US Of A! Miller and Lincoln machines for something in the 250 amp range complete with cooler is in the range of seven to $8000 Canadian funds. I have ...