whats up guys, i have for sale a CK9 Flex torch with 25ft lead. it has a dinse connector for a lincoln tig 200 machine. i have used it maybe 5 times and since purchased a water cooled 20.

125 plus shipping

i made a T coming off my argon hose on my bottle. one goes to my torch and the other goes to a valve with a hose coming off of it. if i need to purge a tube i watch my flow meter when i crack the valve a little to make sure the gas coming out of the torch is fine. not super fancy but it works well....

Whats up guys, I have tig welding stainless before but only in small automotive applications but looking to take it further. I am looking into to start purging my stainless and use it more then mild steel for hot sides or exhaust. I have two argon bottles, one 330cf, and the other 80cf. I only have ...

I was gonna post in this thread and say that I've had mine about 9 months and its been fine. Then thought whats the point of that, not really useful info. However went to use it today and battery is gone. Its reading 2.2V. So I got a new battery and all is well but I'll go measure the new one and s...

Assuming this takes lithium coin cells a new one should read over 3 volts - it's possible the screen is faulty but it's more likely you got unlucky & have a bad battery - it does happen. I wish that was the case, i bought 2 brand new batterys. So i doubt both of them were bad. I tested them vol...

sedanman wrote:Try new batteries.

Something is definelty wrong with the screen. I put in a new battery and the low battery light lite up and faded away within 5 seconds.

I tossed a new battery in it, it says about 2.5 volts and the old one is about 1 volt when tested. i have not loaded tested them which i will take them both to work tomorrow and just double check. MAybe i just ahppened to get a bad battery from the store ? lol i am having no luck.

Hey guys, i posted awhile back about buying a viking 3350 welding hood. At first i loved it and technically still do but is there something im doing wrong because everyone gives these things killer reviews but this is my 2nd time of my shade all the sudden stopped switching to dark no matter what i ...

I have a 17 series Air cooled torch and have a stubby gas lense kit that i use from time to time. CAn i use a series 9 Fupa cup? or any 9 series cup for mater? They sell a 17 series kit so I would assume so or just call them up. http://furickcup.com/ adapter: https://weldmongerstore.com/products/fu...

I have a 17 series Air cooled torch and have a stubby gas lense kit that i use from time to time. CAn i use a series 9 Fupa cup? or any 9 series cup for mater?

I have the previous version of the 3350 with the 1/1/1/1 clarity and have been coveting the 4c since it came out. Even my version is such a jump in weld visibility over my old speedglass it isn't even funny. Can't wait to get the new version. I never knew it was that drastic of a change, i weld pro...

Lense is clear, not green anymore. Its showing real colors. not the same as my cheapy jackson. view is great. I really like how the viking lights up the entire work piece vs just the weld area. Not critical but nice. Great view of weld puddle. i weld a bunch of different things from 30amps to 170 u...

Haha, that's awesome :lol: Millers protective plastic is covered with "Miller" so you can't weld with them on but I am sure i would have done the same as I am very careful with my hood. Well, not that careful but you know what I mean. Yup, like nailpounder said, its just one of those thin...

Haha, that's awesome :lol: Millers protective plastic is covered with "Miller" so you can't weld with them on but I am sure i would have done the same as I am very careful with my hood. Well, not that careful but you know what I mean. Yup, like nailpounder said, its just one of those thin...

Thats what i had to do because i had to send the lense back cause it took a crap in two weeks of using it! I was mad, i only use it on the side but for small inside work. took a little over two weeks for the warranty claim and the whole new disply

Ill let you know when i try now without both films on both sides of the lense....hah :lol: I will be using it later this evening. I have done the grounding clamp too, but usually i know cause it makes a short sound. im going to peel both of the protectors off real quick and report back :lol: :lol: ...

Haha, that's awesome :lol: Millers protective plastic is covered with "Miller" so you can't weld with them on but I am sure i would have done the same as I am very careful with my hood. Well, not that careful but you know what I mean. Yup, like nailpounder said, its just one of those thin...

i hope this is the right place for this. I have a viking 3350 that i just got and i know this is probably a dumb question but there is a thin green film on the inside of the lense. Is this supposed to come off or stay on? I have been welding with it on for a couple weeks....lmao.

Yeah, And if you do tend to exceed the duty cycle, you might just consider using the wedge collets, as that's where you'll get the most abuse from the heat, which tends to "corkscrew" a typical collet. Im experiencing now what this exactly means. My normal "half" looking collet ...

ahh...i was afraid of that. I really want a water cooled ck20 but wont be happenining until i get some more jobs that make it worth while. Looks like im just sticking with the 17!

Whats up guys, i am getting a new tig torch here soon and i have a couple of questions. I am currentley using a wp17 air cooled from lincoln. I have noticed that around 150amps you def need adiquite cool time and its rated for 150 at 60 percent duty cycle. I am looking at the ck flex head 9 series a...

Does anyone know of someone who has one for sale by chance? Cant seem to find any black friday deals.

MosquitoMoto wrote:

hypforlife32 wrote:

RamboBaby wrote:+1 on the flex head torch. CK FlexLoc is even better.

I am a big fan of the flex head, have you heard of any revvies on the artic chiller by chance

From memory Oscar has one - I'm sure he'd be happy to share his opinion.



Kym

I sent him a PM! thanks

RamboBaby wrote:+1 on the flex head torch. CK FlexLoc is even better.

I am a big fan of the flex head, have you heard of any revvies on the artic chiller by chance

If you try to start on the edge of thin aluminum it is always gonna peel back. You can weld up to the edge but you can't really start from the edge. Maybe some guys can, I can't. You won't ever see Jody do this in his videos either. Tacks are always placed a few millimeters from the edge. The reaso...