Search found 10 matches

by RonLyke
Sun Nov 13, 2016 3:15 pm
Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
Topic: Running 5P+ on a lincoln square wave 200
Replies: 5
Views: 1163

Re: Running 5P+ on a lincoln square wave 200

Thanks.
I guess I'll spend some serious practice time with 6011 and maybe some 7018, then come back & try 6010. From what I've read, I won't be surprised if Oscar is right.
by RonLyke
Sat Nov 12, 2016 6:51 pm
Forum: Stick Welding/Arc Welding - Shielded Metal Arc Welding
Topic: Lincoln Square Wave TIG 200 vs 6010?
Replies: 3
Views: 3059

Lincoln Square Wave TIG 200 vs 6010?

Has anyone else had trouble with 6010 on the Lincoln Tig 200?

I've read that some inverters don't play well with 6010. I assume any trouble I have is due to the fact that I'm a beginner and don't know what I'm doing, but maybe not this time?
by RonLyke
Wed Oct 19, 2016 5:10 am
Forum: Mig and Flux Core - gas metal arc welding & flux cored arc welding
Topic: Miller 211 vs Lincoln Power mig 210
Replies: 4
Views: 774

Miller 211 vs Lincoln Power mig 210

I'm planning to upgrade from my Millermatic 135 mig machine, and am undecided between the Miller 211 and the Lincoln Power mig 210 (maybe others I don't know about. I don't want to go too far over $1000.00. (Side note: I have a Square Wave 200, so the tig feature of the Power Mig 200 isn't important...
by RonLyke
Thu Sep 15, 2016 3:31 pm
Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
Topic: What polarity for tig aluminum
Replies: 5
Views: 26589

Re: What polarity for tig aluminum

Motoenginerring---Thanks for the explanation. It seems clear now. Rick---I have a Lincoln Square Wave TIG 200, new just a few days ago. I've been pretty busy, so I only have a few minutes on the machine. I'm new to welding, so I will spent running beads on thin steel for a while. I appreciate all th...
by RonLyke
Wed Sep 14, 2016 7:10 pm
Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
Topic: What polarity for tig aluminum
Replies: 5
Views: 26589

What polarity for tig aluminum

Dumb newbie question:

When welding aluminum AC, is the torch connected to positive or negative? I know the polarity alternates, but with AC balance changes, I would think it would matter.

Thanks.
by RonLyke
Fri Sep 09, 2016 4:02 pm
Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
Topic: Continuous gas flow?
Replies: 3
Views: 644

Re: Continuous gas flow?

Solved;

When i first encountered the problem, I had not installed the consumables in the torch. I tried again with everything in place, ready to weld, and it worked as it is supposed to. I guess the solenoid needed little back pressure to work.
by RonLyke
Fri Sep 09, 2016 5:14 am
Forum: Tig Welding - Tig Welding Aluminum - Tig Welding Techniques - Aluminum Tig Welding
Topic: Continuous gas flow?
Replies: 3
Views: 644

Continuous gas flow?

I just bought a Lincoln Square Wave 200, but have not yet struck an arc. When I set it up, I turned on the gas, and it flowed continuously, even though there was no arc. Is this right?

Thanks from a beginner.
by RonLyke
Fri Sep 09, 2016 5:11 am
Forum: Member Introductions
Topic: Beginner from upstate NY
Replies: 2
Views: 342

Beginner from upstate NY

Old retired guy wanting to learn to weld.