Rendered image from the 3D program.

A few more shots of the project during the construction phase. I seriously questioned my own sanity on a couple of occasions while this thing was coming together but I got it done. Putting all of that bracing inside of the roof was the most difficult part because there was so little room to move, ev...

I've already written this post twice and I'm not going to do it again because it keeps deleting it and telling me I've got to log in again. Enjoy the photos. It's a 275 lb Whopper that I built on my kitchen counter in my apartment in Kennesaw Georgia. Designed by me in Blender 3D and laser cut as we...

I'm practicing for D17.1 1G on 8" X 16 gauge 304 ss coupons. I haven't really welded since 2018 so I have forgotten a ton of info. I have never even attempted aerospace welding until last week. I've been welding these things while trying to follow the instruction on Jody's videos. That is a bit...

Thanks guys.

Hi guys, So I'm getting tired of these little b.s. subcontractor gigs that only pay $15 - $20/hr. I want a real job with a real future and real pay that can support a family of four with something left over to play with and retire on. And Lockheed isn't very far from me in Marietta GA. I know they p...

My new job is gravy. And it pays good too.

Looks like you hooked up to an O2 bottle rather than argon.

Stainless requires a lot less heat than other metals. As long as youre not welding thin stainless then you're not gonna run into too many problems. I've tig welded a lot of stainless bakery equipment and can say for certain that 316 rod is the easiest to work with. I believe that it is the only acce...

Sjeane89 wrote:diesel big blue

Yessirreebob, every one of those things I've used seem to run considerably hotter than advertised.

I figured that it was made in chineez, just like the welder. It's awesome none the less.

The rule of thumb with aluminum is 1.1 amps per thousandth thickness. I learned to tig weld on 1/16" wall, square, aluminum tubing. I didnt learn to tig on steel. I just set it on 70 amps and kept practicing. It should take 2 to 3 seconds to get a puddle going and it starts with slow dabbing ti...

I bought my Everlast Powertig 255ext and just got the basic package. I never had any problem with the pedal until a couple of months ago when the micro switch took a shit. Rather than trying to find a replacement part I just upgraded to the best quality pedal that Everlast offers: a 2,000,000 cycles...

The only filler rod that i have ever bought that wasnt stamped is titanium rod. But it had paper stickers on each end of the rod that labeled it.

Si Señor.

Yep, that's working out purdy good Raticus. Thanks again.

A coworker told me that he usually does 6" runs on those little tables. That table frame is the ONLY thing that I haven't warped since I started working there. This stainless crap has me paranoid. Thanks for the replies.

194 tacks @ 1 tack per inch. Working my way around the table with 1/2" welds spaced 6" apart. Is there any way to make this any easier without warping this schmoz? Frame is 1/8" wall X 1" tubing. Top is 11 gauge. All this aggravation because we didn't have anyone in the shop toda...

What were you welding? That looks like galvanized to me. That stuff cracks, pops and explodes while welding. Blows base metal crap back onto your tungsten. Smokes up your cup with that wonderful, milky whiteness. I just had to weld that crap last night at a bakery in the most awesomely awkward and p...

Thanks Pete. I'm just as surprised as you are.

No, not typical pay. I think their main guy makes about $22/hr but they can't get any work out of him anymore. I think the guy has a drug problem and I'm gonna be replacing him fully as soon as they've had time to assess my performance. I was told that I did more in three hours than their main guy h...

Conveyor for a cake factory. My big toes hurt from welding on my knees all day. I can't feed rod with my right hand and didn't realize it until today. That's making this a lot harder than it has to be. Edit: Even at 105amps their aircooled torch sux! I gotta make an outlet adapter so I can use my ow...

I got started @$12/hr and was told that if all goes well then I'll get boosted to $15/hr after one month. I think my welds look terrible but these guys are extremely pleased. When the owner saw how much I had done and how it looked, he boosted me up to $14/hr. I think my welds look like total shit b...

Thank you brother.

Alright guys, life just threw me a curve ball. I bought the metal for my practice coupons but......a friend of mine showed his boss a few pictures of my tig welds and his boss told him to get me in there because he wants me to start work tomorrow morning. He said it would pay between $16 & $18/h...