How do you remove the factory bumper on the saw. I'm having trouble finding any information on how to do it. Want to make a vertical table for it, and I can only get to one of the screws.

How do you remove the factory bumper on the saw. I'm having trouble finding any information on how to do it.

They did not give us a wps at all it's a weird situation that nobody understands, I won't bore you guys with all that corporate crap. I got some help from a friend today on running the solid wire uphill on plate, then setup a some 2" coupons and I ran a few mock test and the results aren't grea...

They are X-ray testing, there was a backing ring in there too so it wasn't open root. I got a few pics of the root already in it if you would like to see.

Oh also this is the first 6g cert test I've ever taken not much of a pipe welder most of the stuff I've ran is structural plate. Only like the 3rd time running butt joint on pipe. Most of the pipe welds I make are welding flanges on so its all flat.

The bad thing is they want it ran uphill. Trying to get new work into the shop it's some sort of jack for airplanes not really for sure on details nobody has really told us much other than what the test was. It's terrible I'll put up a pic of my attempt at it. Yes I know it looks like Fido went numb...

So this is the test we had to take this week and it is horrible. Was wondering if anybody has ran this before and if you have do you have any tips or pointers? This is my first time using this forum but figured I would try it cause I don't have anybody to ask about this, everyone I've talked to says...