Thanks for the replies. I guess the fact that my left wrist (I'm right-handed) is full of screws and pins from a bad accident doesn't help. Jody says that feeding rod is the last thing that gets "learnt" when tig welding. I'll follow you-all's advice and see where it ends up. It is someth...

_rVqWeS4rbA

as i got more comfortable, i use more thumb and less any other fingers... can feed pretty quickly and consistently now, in most positions i am welding in...

and another... i have a friend who like this team, lol, so im sure he will want it when he sees it... http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8196.jpg http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8199.jpg http://i149.photobucket.com/...

still working nicely... i dont use pulse... after welding with this for a little bit i am very comfy welding with both hands and feeding rod at a fast consistent pace... gotta keep at it.. http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8107.jpg http://i149.photobucket.co...

the 4943 does seem to weld different than the other rods... and the appearance is different too... but welded nicely... http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8085.jpg http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8111.jpg http://i14...

MosquitoMoto wrote:You do some damn nice work, LS.



Kym

thank you

welded another one today.. tried out some 4943... http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8071.jpg http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8073.jpg http://i149.photobucket.com/albums/s71/gtsdesigns/Cylinder%20Gas%20Tank/IMG_8075...

Looks good. What it run ya? Whatcha gonna build? I bought some to make a plasma cutting table out of aluminum, but have yet to get to it, lol. not sure, i just wanted to try it out.. i am trying to get practice in as often as possible... i would like to weld aluminum at times, where i can smooth th...

Thanks for the link, been a long time since I've seen that video. The other inside corner alu video Jody has is an example of what I mean where it looks like the torch has a pretty significant angle. In this video too, the pyrex shot looks like it has more torch angle. But that is probably a functi...

i watched a few of these vids before starting it... and pretty much followed the guidance given.. actually answers your question in the video too

-tsii6D-WyM

when i made the tank closest to the seat, i began welding up the inside also, because i wasnt sure whether or not i was going to polish out the welds on the outside, if i didnt like how they came out appearance wise... but i ended up leaving them alone... and not trying to weld up so much of the ins...

See for curved surfaces it makes total sense to me, I also keep it almost perpendicular to the tangent where I'm welding. But would you do that for say a straight inside corner joint? again, im just a newbie and i dont often like to get involved in threads where questions are asked, but just sharin...

im probably more of a newbie compared to most of the members on here... but thought i would give my opinion, from my experience at it thus far... without trying to be too technical, I start out, always trying to be perpendicular with the surface (and no matter the angle of the torch trying to hold t...

this being a thread about where to buy the rod, i felt that i should post my experience with them, after first saying i was happy initially about the price match... now that i have 30lbs of it, im sure, myself and a few others I will share with, will have enough to give it a try... On a good note......

according to the person who initially sold me the rod, it wasnt ordered because they have a minimum amount they have to order from Hobart (which doesnt make sense as they are a larger company and Miller/Hobart dealer, where i am sure they make rather large orders all the time), so then he said to ge...

when I got there, the person I initially ordered the rod from, disappeared. I let the other person know i was there to pick up the order and after waiting a few minutes he brought it up. I signed for it, and started to pick it up, but he asked me to wait, while he verifies I actually paid for the or...

I called Cameron again on Mon 17th. This time, I asked to speak to a "manager" so that i could have them verify exactly what is going on with the order, should have been at the store no later than the 11th. He put me on hold for a while and then apologized to me, saying that the order had ...

I will never buy anything from Cameron again... long story short, I ordered the rod back on the 7th (20 lbs). paid for it in full... they price matched it to weldfabulous (which is now questionable). It was coming from another location approx 1 hour from the store so should have been in Tues the 11t...

UVXUZ0xHRQY

If you know ahead of time you are going to grind it flush then it's a good idea to prep it to an open but weld. I.E. a gap and also bevel back the parts as mush as you reasonably can. This will leave lots of weld material even after you blend in the top. i thought about that too... i will bevel the...

for this set of "tanks" I designed the end caps to match the filler cap... but i had the intention of smoothing out the welds around the end caps to make it appear one piece... there seems to be info all over the place on this.. i welded this particular tank with 5356... i do have some 494...

got one welded up...