Comments & questions on new & past videos
Post Reply
User avatar

Hey guys, I am posting 2 videos here today...One that I made with Roy Crumrine, and also... a very old video made by Lincoln.

Anyone remember Mr Shrink? those basics never change.

http://www.weldingtipsandtricks.com/wel ... -tips.html
AKPwvVojfXc

2vuGlcbDwKY
Gobysky
  • Posts:
  • Joined:
    Sat Mar 30, 2013 6:38 pm
  • Location:
    Kentucky Lake area

One of the hardest things for me to learn is compensating for distortion/warpage. Thanks for the vids.
  • Posts:
  • Joined:
    Thu Aug 13, 2015 11:38 pm
  • Location:
    Scranton/WilkesBarre, Pennsylvania

Warpage , movement and distortion is definitely a challenge !
I gathered a few video's I found on youtube and made a playlist on this .

https://www.youtube.com/playlist?list=P ... RHvktNLp60
User avatar
  • Posts:
  • Joined:
    Sat Aug 01, 2015 8:38 am
  • Location:
    The Land Down Under

Very timely videos, thanks Jody.

I am fast discovering that to be a welder is also to be a fabricator, and that welding is also a lot like painting - a great result relies on good preparation. And of course shrinkage is part of this consideration.

I fabricated a motorcycle race stand recently and didn't think much about distortion....but the pickup hooks had to wind up in position with only about 2mm tolerance, and believe me I started paying close attention to shrinkage the moment I realised my 'square' job had become anything but!

Oh, and that Lincoln Electric/Disney video...gold!



Kym
Post Reply